Certacor 710 — polyorganosiloxane material for metal and concrete, C1–C4
Polyorganosiloxane coating for metal, concrete and reinforced concrete structures in aggressive gas-air media, C1–C4 per ISO 12944-2.

CERTA KO-8101 primer-enamel is applied without a separate primer to superheated steam pipelines, heat pipelines, product pipelines and oil pipelines, metal chimneys, ship hulls and machinery, and metal roofing. The temperature limit depends on the colour: black — 700 °C, silver-grey — 650 °C, red-brown — 500 °C, most others — 400 °C, green — 350 °C. The coating is resistant to mineral oil, petroleum products and salts; work is permitted from −30 °C.
| Manufacturer | CERTA — OOO “NPP “Spektr”, Novocheboksarsk |
|---|---|
| Type | heat-resistant coatings |
| Base | one-component silicone enamel (primer-enamel); organic solvents |
| Colour | silver-grey, white, grey, black, green, bright red |
| Packaging | 25 kg |
| Application method | air spray (working viscosity 20–25 s), airless spray (35–50 s), brush or roller (30–50 s); stripe coat on welds and edges; preparation Sa 2½ per ISO 8501-1 (St 3 permitted); solvent CERTACOR R, toluene, o-xylene (not more than 10 %; white spirit, solvent naphtha and petrol are not permitted) |
| Application temperature | from −30 °C to +40 °C; relative humidity not more than 80 %; surface 3 °C above the dew point; no precipitation, wind not more than 10 m/s |
| Drying | intercoat drying 90 min at −30 °C, 60 min at 0 °C, 30 min at +20 °C; full properties in 72 h at +20 °C; for service above 100 °C — hot curing at commissioning: 1 h in air, heating (4±0.5) °C/min, at least 3 h at service temperature; for mineral oil and petrol media without heating — 30 min at 250–400 °C; installation — not earlier than 72 h |
| Key properties | Service temperature: from −60 °C to +700 °C depending on colour (black 700 °C, silver-grey 650 °C, red-brown 500 °C, white, red, yellow, grey, blue 400 °C, green 350 °C), Resistance to mineral oil, petroleum products, salts, No priming required |
| Compatible materials | applied without primer; any primer used must not impair the properties of the system |
| Shelf life | 12 months from the date of manufacture; storage from −30 °C to +40 °C |
| Standards | TU 2312-010-49248846-2010 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Polyorganosiloxane coating for metal, concrete and reinforced concrete structures in aggressive gas-air media, C1–C4 per ISO 12944-2.
Silicone primer-enamel for steel furnaces, boilers, heat exchangers, equipment and hot water pipelines; also available in 0.8 kg packs.
One-component silicone enamel for gas and steam pipelines, chimneys, boilers and bridges; up to +1,200 °C depending on colour.
Silicone primer-enamel for power line towers, lighting masts, trestles, trusses, facades, foundations and tunnels, from −60 °C to +150 °C.
Radiation-resistant decontaminable organosilicate composition for concrete, brick, reinforced concrete, tunnels and NPP power unit rooms.
Polyorganosiloxane primer-enamel for trusses, power line towers, columns, beams and pipes; system with CERTACOR 01 primer for C1–C3 per ISO 12944-2.