CERTA
CERTA Professional heat-resistant anticorrosion enamel — to +1,200 °C, thermal cycling
CERTA Professional silicone enamel: black satin up to +1,200 °C, the coating withstands repeated thermal cycles without cracking.
Price on request
CERTA
KO-870 CERTA — silicone enamel for steel and cement-sand substrates
KO-870 in the CERTA version is designed for two types of substrate: steel and cement-sand surfaces. Under heating, the coating withstands up to +700 °C depending on colour, and for protection against industrial atmospheric corrosion it is used in the range −60…+300 °C. The enamel is manufactured to TU 2312-030-49248846-2015, requires no priming, is resistant to mineral oil, petroleum products and salts, and is applied at temperatures from −30 °C to +40 °C.
Specifications
| Manufacturer | CERTA — OOO “NPP “Spektr”, Novocheboksarsk |
|---|---|
| Type | heat-resistant coatings |
| Base | one-component silicone enamel (primer-enamel); organic solvents |
| Colour | white, silver-grey, grey, black, bright red, green |
| Packaging | 25 kg |
| Application method | air spray (working viscosity 20–25 s), airless spray (35–50 s), brush or roller (30–50 s); stripe coat on welds and edges; preparation Sa 2½ per ISO 8501-1 (St 3 permitted); solvent CERTACOR R, toluene, o-xylene (not more than 10 %; white spirit, solvent naphtha and petrol are not permitted) |
| Application temperature | from −30 °C to +40 °C; relative humidity not more than 80 %; surface 3 °C above the dew point; no precipitation, wind not more than 10 m/s |
| Drying | intercoat drying 90 min at −30 °C, 60 min at 0 °C, 30 min at +20 °C; full properties in 72 h at +20 °C; for service above 100 °C — hot curing at commissioning: 1 h in air, heating (4±0.5) °C/min, at least 3 h at service temperature; for mineral oil and petrol media without heating — 30 min at 250–400 °C; installation — not earlier than 72 h |
| Key properties | Service temperature: from −60 °C to +700 °C depending on colour, Resistance to mineral oil, petroleum products, salts, No priming required |
| Compatible materials | applied without primer; any primer used must not impair the properties of the system |
| Shelf life | 12 months from the date of manufacture; storage from −30 °C to +40 °C |
| Standards | TU 2312-030-49248846-2015 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by CERTA
CERTA
Certacor 111 — polyorganosiloxane primer-enamel for metal protection
Polyorganosiloxane primer-enamel for trusses, power line towers, columns, beams and pipes; system with CERTACOR 01 primer for C1–C3 per ISO 12944-2.
Price on request
CERTA
Certacor 710 — polyorganosiloxane material for metal and concrete, C1–C4
Polyorganosiloxane coating for metal, concrete and reinforced concrete structures in aggressive gas-air media, C1–C4 per ISO 12944-2.
Price on request
CERTA
KO-815 CERTA — heat-resistant gloss varnish for metal up to +300 °C
Colourless gloss silicone varnish for ferrous and non-ferrous metals, pipelines and heat exchangers up to +300 °C.
Price on request
CERTA
KO-85 CERTA — heat-resistant varnish for metal, concrete and brick up to +250 °C
Colourless silicone varnish for metal, concrete and brick heated up to +250 °C, heating pipelines and heat exchangers.
Price on request
CERTA
OS 51-03 CERTA for heating mains — heat-resistant organosilicate composition to +300 °C
Organosilicate composition for the outer surface of heat and steam pipelines laid in ducts, tunnels and above ground, up to +300 °C.
Price on request