OGRAX-KSK fire protection system (OGRAX-T + OGRAX-SK-1)
Combined two-layer coating for steel in heated premises: OGRAX-T thermal fire-insulating layer and SK-1 intumescent paint, R90–R120.

At open industrial sites with aggressive environments, steel and concrete are protected with OGRAX-NSh-A plaster. The low-density dry mix is mixed with water and applied by wet shotcreting or with plastering stations over primer. The material is non-combustible and weather-resistant and works from −50 to +60 °C; fire protection is up to 240 minutes, and service under hydrocarbon fire conditions is possible. The coating is lightweight, with a service life of at least 25 years.
| Manufacturer | OGRAX — GK Unihimtek, Moscow Region |
|---|---|
| Fire protection performance | up to 240 minutes; the table gives 150 and 180 min; service under hydrocarbon fire conditions is possible |
| Application | steel structures, concrete and reinforced concrete |
| Service conditions | industrial (open) atmosphere, from −50 to +60 °C |
| Base | low-density non-combustible plaster mix, mixed with water; bulk density 320±25 kg/m³ |
| Colour | light grey, beige-grey |
| Packaging | multi-layer paper or polypropylene bags with a liner |
| Application method | wet shotcreting in layers or plastering stations; over primer |
| Application temperature | from +5 to +30 °C, RH 50–85% |
| Drying | between coats 12 h, full drying 20–30 days |
| Shelf life | 1 year |
| Standards | TU 23.99.19-093-13267785-2023; GOST R 53295-2009; TR EAEU 043/2017 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Combined two-layer coating for steel in heated premises: OGRAX-T thermal fire-insulating layer and SK-1 intumescent paint, R90–R120.
Weather-resistant two-layer fire protection for steel, R90–R120: OGRAX-T thermal fire-insulating layer and OGRAX-MSK intumescent paint.
Intumescent tape on silica fabric for fire protection of plastic pipes inside walls and floors; EI 180.
Fibreglass fabric pillows with intumescent filler for cable penetrations and fire barrier belts; fire resistance up to 120 minutes.
Water-based intumescent paint for steel (R15–R90) and timber (fire protection performance group 1) in indoor spaces.
Water-based intumescent coating for cables with PE, PVC and rubber sheaths in enclosed premises; complies with GOST R 53311-2009.