Supply across Uzbekistan and to Kyrgyzstan, Tajikistan and Turkmenistan +998 93 815 00 53 Telegram sale@coatix.uz
ALFAPOL EP-1V AS — water-based conductive epoxy primer
ALFAPOL

ALFAPOL EP-1V AS — water-based conductive epoxy primer

Floor primers

In an antistatic polymer floor system, EP-1V AS primer is applied over the base primer and a copper earthing circuit. The water-emulsified compound is vapour-permeable, solvent-free and odourless; surface and volume resistance is below 10⁶ Ω. Bond strength to concrete is at least 2 MPa, and at +20 °C the layer can be walked on after 12 hours.

Specifications

ManufacturerALFAPOL — OOO “ALFAPOL”, Saint Petersburg
Typefloor primers
Useproduction halls, warehouses and logistics, antistatic/conductive
Baseepoxy; Water-emulsified vapour-permeable conductive epoxy primer for antistatic polymer floors
PackagingKit A + B in two containers: Component A – 2 kg, Component B – 8 kg
Application temperatureApplication temperature, °C: +10°C to +30°C
CuringAt 10 / 20 / 30 °C: foot traffic after 24 / 12 / 6 h, medium load after 3 / 2 / 1 days, full load after 5 / 4 / 2 days; Recoat interval, h, min.: 12
Key propertiesBond strength to concrete (failure in concrete), MPa, min.: 2; Surface electrical resistance (point-to-point), Ohm, less than: 10^6; Volume electrical resistance (to ground point), Ohm*m, less than: 10^6
ConsumptionConsumption, kg/m²: 0.1; of ready-mixed ALFAPOL® EP-1V AS compound approx. 100 g/m².
Shelf lifeShelf life in factory packaging – 6 months from the date of manufacture.; Shelf life, months: 6
StandardsTU 20.16.40-003-82166262-2015

Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.

Other materials by ALFAPOL