ALFAPOL
ALFAPOL cure 100 — curing compound for freshly laid concrete
Protective curing impregnation for concrete that prevents surface defects caused by rapid water evaporation during hardening.
Price on request
ALFAPOL
ALFAPOL EP-1VP — water-emulsified vapour-permeable epoxy impregnation
The water-emulsified two-component concentrate penetrates deep into both freshly laid and “old” mineral substrates, leaving them vapour-permeable. The solvent-free impregnation eliminates dusting, strengthens concrete and improves its chemical resistance. At +20 °C foot traffic is allowed after 12 hours and full load after 4 days; bond strength to concrete is at least 2 MPa.
Specifications
| Manufacturer | ALFAPOL — OOO “ALFAPOL”, Saint Petersburg |
|---|---|
| Type | concrete impregnations and hardeners |
| Use | chemically resistant, outdoor areas |
| Base | epoxy; Water-emulsified vapour-permeable epoxy impregnation for concrete floors, two-component concentrate |
| Packaging | Kit A + B in two containers: Component A – 2.5 kg, Component B – 4 kg |
| Application temperature | Application temperature, °C: +10°C to +30°C |
| Curing | At 10 / 20 / 30 °C: foot traffic after 24 / 12 / 6 h, medium load after 3 / 2 / 1 days, full load after 5 / 4 / 2 days; Recoat interval, h, min.: 12 |
| Key properties | Bond strength to concrete (failure in concrete), min., MPa: 2; Service temperature, °C: from -30 to +50 |
| Consumption | Consumption, kg/m²: from 0.15; Consumption of ALFAPOL® EP-1VP depends on the absorbency of the substrate, approx. from 150 g/m² per coat. |
| Shelf life | Shelf life in factory packaging – 6 months from the date of manufacture.; Shelf life, months: 6 |
| Standards | TU 20.16.40-003-82166262-2015 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by ALFAPOL
ALFAPOL
ALFAPOL MB(i) GSM — oil- and petrol-resistant non-sparking antistatic floor
Magnesia concrete floor on crushed marble that does not spark, dissipates static and withstands petrol and mineral oil.
Price on request
ALFAPOL
ALFAPOL MB(i) — magnesia-based non-sparking antistatic concrete floor
Magnesia concrete floor with crushed marble for workshops and warehouses: it does not spark, dissipates static charge and resists petrol and mineral oil.
Price on request
ALFAPOL
ALFAPOL TOP 100(i) — non-sparking dry topping for concrete
Dry non-sparking hardening mix for the top layer of freshly laid concrete in workshops, warehouses, car parks and open areas.
Price on request
ALFAPOL
ALFAPOL BR A — heat-resistant concrete floor on high-alumina cement
Heat-resistant floor coating on high-alumina cement with crushed chamotte for forging, steelmaking and heat-treatment facilities.
Price on request
ALFAPOL
ALFAPOL PU-4S ASKh — chemical-resistant antistatic self-levelling PU-cement floor
Self-levelling polyurethane-cement floor with static dissipation and chemical resistance for workshops, wet rooms and outdoor areas.
Price on request