ALFAPOL
ALFAPOL PU-2Kh — chemical-resistant polyurethane self-levelling floor
Rigid-elastic polyurethane floor resistant to petroleum products, acids and alkalis for production sites, warehouses and wet rooms.
Price on request
ALFAPOL
ALFAPOL EP-2ASKh — chemical-resistant antistatic epoxy self-levelling floor
This epoxy self-levelling floor combines chemical resistance with antistatic properties: the main layer is laid over the EP-1V AS conductive layer and copper earthing tape. According to the technical data sheet, Shore D hardness is at least 80, compressive strength 60 MPa, flexural strength 35 MPa, Taber abrasion up to 50 mg. The coating is tintable to RAL, suitable for wet rooms and serviceable from −30 to +50 °C.
Specifications
| Manufacturer | ALFAPOL — OOO “ALFAPOL”, Saint Petersburg |
|---|---|
| Type | epoxy floors |
| Use | production halls, food and pharmaceutical, chemically resistant, antistatic/conductive, wet areas |
| Base | epoxy; Epoxy self-levelling floor, chemical-resistant antistatic self-levelling epoxy coating |
| Colour | tintable to RAL |
| Packaging | Component A: 20 kg, Component B: 5 kg, Component C (graded quartz filler 0.1-0.4 mm): 25 kg bag |
| Application temperature | Substrate moisture, max.: 5%; Substrate and air temperature: from +10 to +30°C |
| Curing | At 10 / 20 / 30 °C: foot traffic after 3 / 2 / 1 days, medium load after 7 / 5 / 3 days, full load after 10 / 7 / 5 days; Recoat interval, h, min.: 12; Foot traffic, h, min.: 24; Full cure, days, min.: 7 |
| Key properties | Shore D hardness, min.: 80; Compressive strength, min., MPa: 60; Flexural strength, min., MPa: 35; Taber abrasion (CS10/1000 g/1000 rev), max., mg: 50; Bond strength to concrete (failure in concrete), min., MPa: 2; Service temperature, °C: from -30°C to +50 |
| Consumption | for 1 mm thickness: 1.66 kg/m². CONSUMPTION for 2 mm thickness with sand (1:0.5): 2.54 kg/m² of compound + 1.27 kg/m² of sand (0.1-0.4 mm). CONSUMPTION for 2 mm thickness with sand (1:1): 2.06 kg/m² of compound + 2.06 kg/m² of sand (0.1-0.4 mm) |
| Shelf life | Shelf life, months: 6; Shelf life in unopened factory packaging – 6 months from the date of manufacture. |
| Standards | TU 20.16.40-001-82166262-2015 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by ALFAPOL
ALFAPOL
ALFAPOL K — high-strength magnesia self-levelling floor
Non-shrink magnesia self-levelling floor for production halls: compressive strength 50 MPa, resistant to petrol and oils, NG.
Price on request
ALFAPOL
ALFAPOL VB-1000(i) AS — non-sparking antistatic concrete floor
Non-sparking antistatic concrete floor based on special cement for workshops, warehouses and open areas, with compressive strength from 80 MPa.
Price on request
ALFAPOL
ALFAPOL PU-2ASKh — chemical-resistant antistatic polyurethane self-levelling floor
Solvent-free self-levelling polyurethane for workshops with aggressive media, where the coating must also dissipate static charge.
Price on request
ALFAPOL
ALFAPOL PU-4S — self-levelling polyurethane-cement floor
Self-levelling polyurethane-cement floor for food and chemical plants, car parks and wet areas that can be steam-cleaned.
Price on request
ALFAPOL
ALFAPOL BR A — heat-resistant concrete floor on high-alumina cement
Heat-resistant floor coating on high-alumina cement with crushed chamotte for forging, steelmaking and heat-treatment facilities.
Price on request