ALFAPOL K — high-strength magnesia self-levelling floor
Non-shrink magnesia self-levelling floor for production halls: compressive strength 50 MPa, resistant to petrol and oils, NG.

The PU-4VN ASKh polymer-concrete coating combines antistatic properties with chemical resistance, water resistance and heat resistance — up to +130 °C depending on the version. The surface can be smooth or textured rough, in a muted tinted shade. Shore D hardness is at least 80, compressive strength 40 MPa, flexural strength 12 MPa, electrical resistance below 10⁶ Ω; full load after 7 days.
| Manufacturer | ALFAPOL — OOO “ALFAPOL”, Saint Petersburg |
|---|---|
| Type | polyurethane-cement floors |
| Use | production halls, warehouses and logistics, food and pharmaceutical, chemically resistant, antistatic/conductive, wet areas, outdoor areas |
| Base | polyurethane-cement; Polyurethane-cement antistatic chemical-resistant and heat-resistant floor |
| Colour | The tinted polymer-concrete coating has a smooth or textured rough surface in a muted shade |
| Packaging | Plastic containers: Component A 3.5 kg, Component B 3.0 kg. Polypropylene bag: Component C 25 kg |
| Application temperature | Application temperature, °C: +10°C to +30°C |
| Curing | At 20 °C: foot traffic after 3 days, medium load after 5 days, full load after 7 days; Recoat interval, h, min.: 24; Foot traffic, h, min.: 72; Full cure, days, min.: 7 |
| Key properties | Service temperature, °C: 6 mm layer -25 to +80, 9 mm layer -40 to +120, 12 mm layer -40 to +130; Shore D hardness, min.: 80; Compressive strength, MPa: 40; Flexural tensile strength, MPa: 12; Bond strength to concrete (failure in concrete), min., MPa: 2.0; Surface electrical resistance, Ohm, less than: 10^6; Volume electrical resistance, less than: 10^6 |
| Layer thickness | Layer thickness, mm: 5-15 |
| Consumption | at 5 mm layer thickness – 10 kg/m². |
| Shelf life | Shelf life, months: 6 |
| Standards | TU 23.64.10-006-82166262-2018 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Non-shrink magnesia self-levelling floor for production halls: compressive strength 50 MPa, resistant to petrol and oils, NG.
Water-dispersion concentrate for sealing the pores of ground mosaic concrete (terrazzo) on magnesite and cement.
One-component acrylic primer for ALFAPOL ZIMA series mixes, used at substrate and air temperatures from −5 °C.
Heat-resistant concrete floor of class I13 with crushed chamotte for forging, steelmaking, rolling and heat-treatment shops.
Thixotropic repair mix for filling defects and finish-levelling substrates in workshops and open areas.
Water-dispersion primer concentrate for absorbent and non-absorbent mineral surfaces before mineral coatings.