Supply across Uzbekistan and to Kyrgyzstan, Tajikistan and Turkmenistan +998 93 815 00 53 Telegram sale@coatix.uz
ALFAPOL PU-4OGP ASKh — anti-slip antistatic polyurethane-cement floor
ALFAPOL

ALFAPOL PU-4OGP ASKh — anti-slip antistatic polyurethane-cement floor

Polyurethane-cement floors

The four-component system containing quartz sand gives an anti-slip surface that both dissipates static and withstands chemical attack. The coating is designed for production areas with high abrasive, impact and mechanical loads, as well as for ramps, car parks, wet rooms and outdoor areas. Abrasion is no more than 0.4 g/cm², bond strength to the substrate from 2 MPa, and the upper service limit is up to +130 °C depending on the version.

Specifications

ManufacturerALFAPOL — OOO “ALFAPOL”, Saint Petersburg
Typepolyurethane-cement floors
Useproduction halls, warehouses and logistics, car parks and ramps, chemically resistant, antistatic/conductive, wet areas, outdoor areas
BaseAntistatic chemical-resistant polyurethane-cement floor, anti-slip heat-resistant coating
Packagingcomponent A — 3.4 kg, component B — 2.8 kg (plastic pails or canisters); component C — 3.3 kg (plastic pail); component D — quartz sand 0.4–0.8 mm or marble sand 0.2–0.5 mm (for the spark-safe version)
Application temperatureApplication temperature, °C: +10°C to +30°C
CuringAt 20 °C: foot traffic after 3 days, medium load after 5 days, full load after 7 days
Key propertiesService temperature, °C: 2 mm layer from -10 to +70, 7 mm layer from -20 to +90, 9 mm layer from -30 to +130; Adhesion to mineral substrate at 28 days, min., MPa: 2 (failure in the substrate); Abrasion, max., g/cm²: 0.4
Layer thicknessLayer thickness, mm: 2-10
ConsumptionConsumption: first intermediate layer, kg/m²: 0.6; second intermediate layer, kg/m²: 1.3; rough finishing layer, kg/m²: 0.4+0.4; smooth finishing layer, kg/m²: 0.4+1.2; quartz sand, fr. 0.4-0.8 mm, for broadcasting, kg/m² – 3; marble sand, fr. 0.2-0.5 mm, for broadcasting, kg/m² – 3
Shelf lifeShelf life in factory packaging – 6 months from the date of manufacture.
StandardsTU 23.64.10-006-82166262-2018

Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.

Other materials by ALFAPOL