ALFAPOL
ALFAPOL VB-1000 — high-strength rapid-hardening concrete floor
Special-cement concrete floor with compressive strength from 80 MPa and foot traffic after 4–5 hours for workshops, warehouses and car parks.
Price on request
ALFAPOL
ALFAPOL TOP 200 — liquid topping with microfibre
The cement hardener with microfibre is applied as a mortar layer — on old or fresh concrete — and creates a coating for production facilities with significant abrasive and impact loads. Compressive strength is at least 60 MPa, flexural strength 9 MPa, abrasion no more than 0.4 g/cm², frost resistance F400. According to the technical data sheet, a high intensity of water exposure is permitted, combustibility class NG; foot traffic after 8–10 hours.
Specifications
| Manufacturer | ALFAPOL — OOO “ALFAPOL”, Saint Petersburg |
|---|---|
| Type | toppings |
| Use | production halls, outdoor areas |
| Base | Portland cement; Liquid concrete topping B50 F400 Rk2 - Rk3 |
| Colour | base grey or tinted in muted colours |
| Packaging | Dry mix in polypropylene bags: 25 kg |
| Application temperature | Application temperature: from +10°C to +25°C; Air and substrate temperature: from +10 to +25°C |
| Curing | Site foot traffic possible after: 8-10 hours |
| Key properties | Max. aggregate size: 2.5 mm; Service temperature: -40 to +50°C; Compressive strength at 28 days, min.: 60 MPa; Flexural tensile strength: 9 MPa; Adhesion at 28 days, min.: 0.8 MPa; Frost resistance grade: F400; Abrasion, max.: 0.4 g/cm² **Intensity of mechanical impact per SNiP 2.03.13.88: significant; Intensity of water exposure per SNiP 2.03.13.88: high; Combustibility class, GOST 30244-94: NG (non-combustible) |
| Layer thickness | Coating thickness on an existing concrete substrate: 10-40 mm; Coating thickness on a "fresh" concrete substrate: 8-10 mm |
| Consumption | Consumption: 2 kg/m²/mm |
| Shelf life | Guaranteed shelf life of the dry mix under normal conditions in intact factory packaging is 6 months from the date of manufacture. |
| Standards | TU 5745-011-82166262-2012; combustibility class per GOST 30244-94 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by ALFAPOL
ALFAPOL
ALFAPOL VS — decorative coloured self-levelling cement floor
Coloured wear-resistant self-levelling floor on special cement for retail, public and production premises, class NG.
Price on request
ALFAPOL
ALFAPOL EP-1V AS — water-based conductive epoxy primer
Vapour-permeable solvent-free conductive epoxy primer for antistatic polymer floors in workshops and warehouses.
Price on request
ALFAPOL
ALFAPOL ShP+ — magnesia finishing skim coat for floors
Non-shrink magnesia skim coat for thin-layer levelling and repair of potholes, chips and cracks in mineral floors.
Price on request
ALFAPOL
ALFAPOL KI — magnesia-based antistatic self-levelling floor
Non-sparking antistatic magnesia self-levelling floor for workshops and warehouses, resistant to petroleum products, combustibility class NG.
Price on request
ALFAPOL
ALFAPOL MB-600(i) — magnesia-based non-sparking antistatic floor
Magnesia floor with 2.5–5 mm graded marble aggregate: it does not spark, dissipates static and resists petrol and mineral oil.
Price on request