ALFAPOL RS — cement-based thixotropic repair mix
Cement-based thixotropic mix for repairing and levelling concrete substrates in workshops, wet rooms and open areas.

Crushed granite of 5–10 mm fraction and a cement dry mix are the two components of the VB finished concrete floor for workshops, warehouses, car parks, wet rooms and open areas. The coating reaches at least 50 MPa in compression, with abrasion no more than 0.4 g/cm², water resistance W16, frost resistance F400 and combustibility class NG. Laying is permitted from as low as +5 °C, site foot traffic after 10–12 hours, service from −50 to +50 °C.
| Manufacturer | ALFAPOL — OOO “ALFAPOL”, Saint Petersburg |
|---|---|
| Type | floor material |
| Use | production halls, warehouses and logistics, car parks and ramps, wet areas, outdoor areas, retail and public |
| Base | cement; Cement-based waterproof industrial concrete finishing floor NG (non-combustible) B40 W16 |
| Colour | the base colour of the coating is grey, tinting possible |
| Packaging | Dry mix, polypropylene bag, 25 kg: ALFAPOL VB®. Crushed granite, polypropylene bag, fraction 5-10 mm, 25 kg. |
| Application temperature | Application temperature: from +5°C to +25°C |
| Curing | Site foot traffic possible after: 10-12 hours |
| Key properties | Service temperature: from -50 to +50°C; Compressive strength at 28 days, min.: 50 MPa; Flexural tensile strength at 28 days, min.: 6.5 MPa; Bond strength to concrete, min.: 0.8 MPa; Abrasion, max.: 0.4 g/cm²; Water resistance grade: W16; Frost resistance grade: F400; Combustibility class, GOST 30244-94: NG (non-combustible); Max. aggregate size: 10 mm |
| Layer thickness | Single layer thickness: from 25 to 100 mm |
| Consumption | Material consumption: 2.3 kg/m²/mm |
| Shelf life | Guaranteed shelf life of the dry mix under normal conditions in intact factory packaging is 6 months from the date of manufacture.; Shelf life: 6 months |
| Standards | TU 5745-009-82166262-2009; combustibility class per GOST 30244-94 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Cement-based thixotropic mix for repairing and levelling concrete substrates in workshops, wet rooms and open areas.
Vapour-permeable matt water-based polyurethane sealer, resistant to ultraviolet, for cement and magnesia floors.
Solvent-free self-levelling epoxy floor for workshops, retail and public buildings, resistant to water and chemical media.
Non-sparking antistatic concrete floor based on special cement for workshops, warehouses and open areas, with compressive strength from 80 MPa.
Magnesia self-levelling floor for workshops and warehouses where petrol and mineral oils reach the coating, compressive strength 50 MPa.
Vapour-permeable water-based conductive polyurethane primer for the electrically conductive layer of antistatic coatings.