ALFAPOL VS — decorative coloured self-levelling cement floor
Coloured wear-resistant self-levelling floor on special cement for retail, public and production premises, class NG.

An antistatic version of the non-sparking Portland cement concrete floor: the surface and volume electrical resistance of the coating is below 10⁶ Ω. Compressive strength is at least 40 MPa, flexural strength 6 MPa, water resistance grade W16, frost resistance grade F300, combustibility class NG. The coating is designed for service from −40 to +50 °C, with site foot traffic 10–12 hours after laying.
| Manufacturer | ALFAPOL — OOO “ALFAPOL”, Saint Petersburg |
|---|---|
| Type | floor material |
| Use | production halls, warehouses and logistics, antistatic/conductive, outdoor areas |
| Base | Portland cement; Cement-based antistatic non-sparking industrial concrete floor NG (non-combustible) B35 W16 |
| Packaging | Dry mix ALFAPOL VB®(i)AS, polypropylene bag, 25 kg. Crushed marble: polypropylene bag, 25 kg. |
| Application temperature | Application temperature: from +10°C to +25°C |
| Curing | Site foot traffic possible after: 10-12 hours |
| Key properties | Max. aggregate size: 10 mm; Service temperature: from -40 to +50°C; Compressive strength at 28 days, min.: 40 MPa; Flexural tensile strength at 28 days, min.: 6 MPa; Bond strength to concrete, min.: 0.8 MPa; Water resistance grade: W16; Abrasion, max.: 0.8 g/cm²; Combustibility class, GOST 30244-94: NG (non-combustible); Surface electrical resistance, less than: 10^6; Volume electrical resistance, less than: 10^6; Frost resistance grade: F300 |
| Layer thickness | Single layer thickness: from 25 to 100 mm |
| Consumption | Consumption: dry mix - 1.15 kg/m²/mm; crushed stone - 1.15 kg/m²/mm |
| Shelf life | Guaranteed shelf life of the dry mix under normal conditions in intact factory packaging is 6 months from the date of manufacture. |
| Standards | TU 5745-009-82166262-2009; combustibility class per GOST 30244-94 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Coloured wear-resistant self-levelling floor on special cement for retail, public and production premises, class NG.
Dry hardening mix based on Portland cement and quartz for concrete floors in workshops and open areas, with abrasion no more than 0.4 g/cm².
Rigid-elastic polyurethane floor resistant to petroleum products, acids and alkalis for production sites, warehouses and wet rooms.
Non-shrink heat-insulating screed on a magnesia binder with expanded clay for production, retail and public buildings.
Cement-based non-sparking thixotropic mix with fine aggregate for repair and finish levelling of substrates in workshops and outdoor areas.
Mosaic concrete on crushed granite for ground terrazzo floors in public buildings, car parks and open areas.