ALFAPOL EP-3VM — matt epoxy sealer for concrete floors
Solvent-free matt epoxy sealer for protecting and decoratively finishing concrete floors, resistant to water and chemical media.

This high-strength oil- and petrol-resistant Portland cement coating levels itself and does not spark, which makes it suitable for workshops, warehouses and car parks. Compressive strength is at least 35 MPa, flexural strength 6.5 MPa, bond strength to concrete 1.2 MPa, grades W8 and F300, combustibility class NG. The coating is supplied in the base colour or tinted; foot traffic after 10–12 hours.
| Manufacturer | ALFAPOL — OOO “ALFAPOL”, Saint Petersburg |
|---|---|
| Type | floor material |
| Use | production halls, warehouses and logistics, car parks and ramps |
| Base | Portland cement; Cement-based oil- and petrol-resistant non-sparking industrial floor B30 W8, self-levelling coating |
| Colour | in the base colour or tinted |
| Packaging | Dry mix ALFAPOL® VK(i) GSM is supplied in 25 kg polypropylene bags. |
| Application temperature | Application temperature: from +10°C to +25°C |
| Curing | Site foot traffic possible after: 10-12 hours |
| Key properties | Compressive strength at 28 days, min.: 35 MPa; Flexural tensile strength at 28 days, min.: 6.5 MPa; Bond strength to concrete, min.: 1.2 MPa; Thermal conductivity: 0.96; Water resistance grade: W8; Frost resistance grade: F300; Abrasion, max.: 0.8 g/cm²; Combustibility class, GOST 30244-94: NG (non-combustible); Max. aggregate size: 0.63 mm |
| Layer thickness | Single layer thickness: from 5 to 25 mm |
| Consumption | Consumption: 1.75 kg/m²/mm |
| Shelf life | Guaranteed shelf life of the dry mix under normal conditions – 6 months from the date of manufacture. |
| Standards | TU 5745-011-82166262-2012; combustibility class per GOST 30244-94 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Solvent-free matt epoxy sealer for protecting and decoratively finishing concrete floors, resistant to water and chemical media.
One-component polyurethane primer-impregnation that strengthens concrete and improves its chemical and water resistance and the adhesion of coatings.
Heat-resistant concrete floor of class I13 with crushed chamotte for forging, steelmaking, rolling and heat-treatment shops.
Matt water-based polyurethane paint, resistant to ultraviolet, for floors in workshops, outdoor areas and public buildings.
Epoxy self-levelling floor resistant to petroleum products, acid and alkali solutions for workshops, food and pharmaceutical plants.
Water-resistant polyurethane-cement floor for food and chemical plants, car parks and wet areas, with service temperatures up to +130 °C.