CERTA
OS-52-20 CERTA — organosilicate composition for abrasive wear and heat
Organosilicate coating for metal, concrete and reinforced concrete under abrasive wear and heating up to +400 °C; categories C1–C3 per ISO 12944-2.
Price on request
CERTA
KO-870 CERTA — silicone enamel for steel and cement-sand substrates
KO-870 in the CERTA version is designed for two types of substrate: steel and cement-sand surfaces. Under heating, the coating withstands up to +700 °C depending on colour, and for protection against industrial atmospheric corrosion it is used in the range −60…+300 °C. The enamel is manufactured to TU 2312-030-49248846-2015, requires no priming, is resistant to mineral oil, petroleum products and salts, and is applied at temperatures from −30 °C to +40 °C.
Specifications
| Manufacturer | CERTA — OOO “NPP “Spektr”, Novocheboksarsk |
|---|---|
| Type | heat-resistant coatings |
| Base | one-component silicone enamel (primer-enamel); organic solvents |
| Colour | white, silver-grey, grey, black, bright red, green |
| Packaging | 25 kg |
| Application method | air spray (working viscosity 20–25 s), airless spray (35–50 s), brush or roller (30–50 s); stripe coat on welds and edges; preparation Sa 2½ per ISO 8501-1 (St 3 permitted); solvent CERTACOR R, toluene, o-xylene (not more than 10 %; white spirit, solvent naphtha and petrol are not permitted) |
| Application temperature | from −30 °C to +40 °C; relative humidity not more than 80 %; surface 3 °C above the dew point; no precipitation, wind not more than 10 m/s |
| Drying | intercoat drying 90 min at −30 °C, 60 min at 0 °C, 30 min at +20 °C; full properties in 72 h at +20 °C; for service above 100 °C — hot curing at commissioning: 1 h in air, heating (4±0.5) °C/min, at least 3 h at service temperature; for mineral oil and petrol media without heating — 30 min at 250–400 °C; installation — not earlier than 72 h |
| Key properties | Service temperature: from −60 °C to +700 °C depending on colour, Resistance to mineral oil, petroleum products, salts, No priming required |
| Compatible materials | applied without primer; any primer used must not impair the properties of the system |
| Shelf life | 12 months from the date of manufacture; storage from −30 °C to +40 °C |
| Standards | TU 2312-030-49248846-2015 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by CERTA
CERTA
KO-815 CERTA — heat-resistant gloss varnish for metal up to +300 °C
Colourless gloss silicone varnish for ferrous and non-ferrous metals, pipelines and heat exchangers up to +300 °C.
Price on request
CERTA
Certacor 510 — heat-resistant polyorganosiloxane enamel up to +400 °C
Heat-resistant enamel for boiler casings, chimneys, flue ducts and heated steel structures, on metal and concrete, up to +400 °C.
Price on request
CERTA
Certacor 511 — heat-resistant polyorganosiloxane material for equipment
Polyorganosiloxane material for casings, housings and panels of equipment, pipelines and flue ducts heated up to +400 °C.
Price on request
CERTA
Certacor 710 — polyorganosiloxane material for metal and concrete, C1–C4
Polyorganosiloxane coating for metal, concrete and reinforced concrete structures in aggressive gas-air media, C1–C4 per ISO 12944-2.
Price on request
CERTA
KO-174 CERTA — weather-resistant primer-enamel for metal and concrete up to +150 °C
Silicone primer-enamel for power line towers, lighting masts, trestles, trusses, facades, foundations and tunnels, from −60 °C to +150 °C.
Price on request