Supply across Uzbekistan and to Kyrgyzstan, Tajikistan and Turkmenistan +998 93 815 00 53 Telegram sale@coatix.uz
“PROTEKT-AKRIL” primer-enamel — two-component, for ambient and forced drying
Khimtek

“PROTEKT-AKRIL” primer-enamel — two-component, for ambient and forced drying

Primer-enamels

The two-component primer-enamel “PROTEKT-AKRIL” is cured with Desmodur N75 and permits both ambient and forced drying: a coat dries in 8 h at 20 °C, in 45 min at 60 °C and in 30 min at 80 °C. It is used on steel structures, external surfaces of tanks for storing and transporting petroleum products, lifting and handling equipment and containers. The stand-alone coating is applied in 2–3 coats; the colour is per the RAL colour card or the customer’s standard.

Specifications

ManufacturerKhimtek — OOO PO “Khimtek”, Yaroslavl
Typeprimer-enamels
Usesteel structures, tanks, equipment
BaseTwo-component: base + Desmodur N75 hardener
Colourper the RAL colour card and to the customer’s standard
Application methodair and airless spray, brush, roller; 2–3 coats; “PROTEKT-AKRIL” thinner
Application temperaturefrom +5 to +35 °C; relative humidity no higher than 85 %
Dryingcoat drying: 8 h at (20±2) °C, 45 min at (60±5) °C, 30 min at (80±5) °C; ready for use 30 min after mixing; pot life 6 h
Key propertiesBase:Desmodur N75 ratio by weight: 100:9.3, Non-volatile matter by weight: 50–60 %, Adhesion: max. 1 point, Impact strength (U-1): at least 50 cm, Resistance at 20 °C: water, industrial oil, petrol — at least 72 h; 3 % NaCl — at least 24 h, Surface preparation: GOST 9.402 (cleaning degree 2, degreasing degree 1) or Sa 2½ / St 3
Compatible materialsstand-alone coating
Shelf life12 months from the date of manufacture
StandardsTU 2313-027-81922626-2015 with amendment 1

Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.

Other materials by Khimtek