KHIMTRAST
Khimtrast PM Hard polyurea — wear-resistant sprayed coating
Hard sprayed polyurea for industrial floors for vehicles, dump truck bodies and railway wagons; Shore A 90–100, strength 19–21 MPa.
Price on request
KHIMTRAST
KHIMTRAST PU thin-layer coating — polyurethane coating for concrete floors
The coating cures with air moisture and forms a protective and decorative wear-resistant layer on concrete, designed primarily for foot traffic. It is applied indoors only over KHIMTRAST Primer-NP, with a velour roller or brush, usually in two coats. Taber abrasion resistance is not more than 40 mg, impact strength at least 50 cm, service temperature −25…+60 °C; walking is allowed after 24 h.
Specifications
| Manufacturer | KHIMTRAST — AO “Khimtrast”, Nizhnekamsk |
|---|---|
| Type | polyurethane floors |
| Use | retail and public, warehouses and logistics, production halls |
| Base | one-component moisture-curing polyurethane compound with organic solvents |
| Colour | homogeneous opaque liquid; tinting by agreement |
| Packaging | steel conical pails 10 l – 10 kg and 20 l – 20 kg |
| Application method | over Primer-NP (250–350 g/m², drying for one day); pour and spread with a velour roller or brush, 2 coats recommended; substrate — concrete at least M300, at least 28 days old, moisture not more than 4 %, slope not more than 3 %; indoors only |
| Application temperature | +15…+25 °C (air); substrate 3 °C above the dew point; relative humidity not more than 65 % |
| Curing | drying to degree 3 at 20 °C — 2–3 h; next coat after 12–48 h; foot traffic after 24 h; full cure 3–5 days |
| Key properties | Taber abrasion resistance (CS10/1000 g/1000 rev) not more than 40 mg; impact strength (U-2M) at least 50 cm; flexibility in bending not more than 1 mm; TML hardness 0.4–0.6; adhesion (cross-cut) not more than 1 point; service temperature −25…+60 °C; high wear resistance to foot traffic |
| Layer thickness | at least 100 µm per coat |
| Consumption | 150–200 g/m² in 1 coat (at least 100 µm) by roller or brush (laboratory figure; actual consumption may be 5–40 % higher) |
| Shelf life | 6 months from the date of production at +5…+30 °C in closed original packaging |
| Standards | TU 20.30.22-089-27903090-2021 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by KHIMTRAST
KHIMTRAST
KhimGermet A (1K) acrylic joint sealant — water-based
One-component acrylic sealant for joints, gaps and cracks in concrete, brick, plaster and wood; elongation at break at least 300%.
Price on request
KHIMTRAST
Khimtrast PU Injection Resin 2K — elastic injection of joints and cracks
Two-component polyurethane resin for injection waterproofing of expansion and construction joints; elongation at break 60–70%.
Price on request
KHIMTRAST
Khimtrast KhimGermet PU (2K) polyurethane joint sealant — UV-resistant
Two-component polyurethane sealant for joints and cracks in concrete, metal, PVC and wood; resistant to UV and temperature changes from −60 to +70 °C.
Price on request
KHIMTRAST
KhTA EP V3 epoxy chemical anchor — 385 ml cartridge, 3:1 ratio
Epoxy anchor for M8–M30 studs and rebar in cracked and non-cracked B25–B60 concrete, as well as in stone and brick; 385 ml cartridge.
Price on request
KHIMTRAST
KHIMTRAST PU Enamel for polyurea, rubber crumb, self-levelling floors — UV-resistant
Gloss aliphatic polyurethane enamel in RAL colours for protecting and colouring self-levelling floors, polyurea and rubber crumb, indoors and outdoors.
Price on request