Supply across Uzbekistan and to Kyrgyzstan, Tajikistan and Turkmenistan +998 93 815 00 53 Telegram sale@coatix.uz
Teksipol SPRINT — fast-drying matt enamel for concrete
KRASKO

Teksipol SPRINT — fast-drying matt enamel for concrete

Other floor materials

Teksipol SPRINT is chosen when concrete has to be painted quickly and in any season: the enamel is applied at temperatures not below −20 °C, and at +20 °C it dries to degree 3 in no more than 1 h. It works in a system with Proteksil strengthening impregnation on new and old cement screeds. It suits warehouses, garages, hangars, open and covered car parks, building aprons, paths and driveways; service range −40…+80 °C.

Specifications

ManufacturerKRASKO — OOO “NPO KRASKO”, Moscow Region
Typefloor material
Usewarehouses and logistics, car parks and ramps, outdoor areas, retail and public
BaseOne-component enamel based on hybrid resins with targeted additives and organic solvent
ColourMatt; Base A, Base C, RAL 7040; per the description: other colours to order from one pail
Packagingper the description — 25 kg container
Application methodFinish coat in a system with Proteksil strengthening impregnation. Substrate: compressive strength at least 20 MPa, pull-off strength at least 1.5 MPa, moisture not more than 10 %; grinding. Ready to use, no thinning; fur roller (hard-to-reach areas — by brush), 1–2 coats, recoat drying 1 h at +20 °C. Indoors and outdoors, new and old cement screeds.
Application temperaturenot below −20 °C
CuringDrying to degree 3: not more than 1 h at 20 °C, 5–6 h at 5 °C; foot traffic — not more than 12 h; final strength development — 3 days
Key propertiesSolids by volume at least 70 %; hiding power (dry film basis) not more than 180 g/m²; fineness of grind not more than 80 µm; conventional viscosity by VZ-246 cup (nozzle 4) 60–120 s; film impact strength at least 40 cm, bending not more than 3 mm; conventional lightfastness 24 h; resistance to fuels and lubricants at least 2 h; service temperature from −40 °C to +80 °C
Consumption200–300 g/m² (theoretical)
Shelf life6 months from the date of manufacture; storage from −10 °C to +35 °C
StandardsTU 20.30.12-062-01524656-2021; state registration certificate; preparation to SNiP 2.03.13-88 and SNiP 3.04.03-87

Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.

Other materials by KRASKO