Kronos SPb
ETON-Infra — epoxy internal flow coating for gas pipeline pipes
Factory-applied epoxy coating for the inner surface of trunk gas pipeline pipes that reduces gas-dynamic losses, more than 90 % non-volatile matter.
Price on request
Kronos SPb
Kronos-Deko enamel — two-component acrylic-urethane topcoat
A UV-resistant finish coat for anticorrosion systems: a two-component acrylic-urethane enamel tinted to the RAL catalogue. Per ISO 12944 it is designed for categories C1–C5M and CX, as well as Im1–Im3, and is used on bridge spans, corrugated pipes, sheet piling, power line towers, tanks, above-ground pipelines and mining equipment. The enamel is applied over the primers “Epokron”, “Protekron” and “Primakron”, on concrete over the varnish “Eteral” or the “KronFlex” system; work is permitted at temperatures from −10 to +40 °C.
Specifications
| Manufacturer | Kronos SPb — AO “KRONOS SPb”, Saint Petersburg |
|---|---|
| Type | polyurethane enamels |
| Base | Two-component acrylic-urethane enamel (base + hardener) |
| Colour | to the RAL catalogue |
| Application method | brush, roller, spatula; air spray (3–4 bar, nozzle 1.8–2.2); airless spray (at least 180 bar, nozzle 0.009–0.017″); thinning max. 10 % (“Kronos-Deko” thinner, xylene, solvent) |
| Application temperature | from −10 to +40 °C; relative humidity max. 85 %; surface at least 3 °C above the dew point; keep the components for 24 h at a temperature not below +10 °C |
| Drying | tack-free (degree 3) — less than 4 h at 20 °C; recoat interval 0.5–1.5 h; pot life at least 3 h at 20 °C |
| Key properties | Corrosivity categories: C1–C5M, CX, Im1 to Im3 per ISO 12944, Non-volatile matter by weight: more than 68 %, Density: 1.26 g/cm³, Impact strength of the coating (U-1): more than 50 cm, Tensile strength: more than 6 mm, Taber abrasion (CS10, 1 kg, 1,000 cycles): less than 75 mg, TML hardness: more than 0.5 conventional units |
| Compatible materials | primers “Epokron”, “Protekron”, “Primakron”; on concrete — over the varnish “Eteral” or the “KronFlex” system; on top — varnish “Kronos-Deko” |
| Shelf life | 24 months from the date of manufacture; storage and transport from −40 to +40 °C |
| Standards | TU 2312-159-20504464-2019; STO 01393674-007-2019 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by Kronos SPb
Kronos SPb
PF-0244 Kronos — pentaphthalic primer for metal, wood and old coatings
Light grey pentaphthalic primer for metal and wood, including previously painted surfaces, dries in max. 6 h at 20 °C.
Price on request
Kronos SPb
Kronos-Deko primer-enamel — acrylic-urethane coating without a separate primer
Acrylic-urethane primer-enamel for metal, concrete and plastic, applied in two coats without priming, recoat interval 15–30 min.
Price on request
Kronos SPb
Kronos-Sprint enamel — gloss fast-drying alkyd enamel, about 50 RAL shades
Gloss alkyd enamel for machine tools, steel structures, agricultural machinery and wagons, each coat dries in 6 h at 20 °C.
Price on request
Kronos SPb
Tsikron — sacrificial zinc-rich primer on a phenol-alkyd base
Sacrificial primer with zinc powder for bridges, tanks and pipelines, temperature resistance from −60 to +140 °C.
Price on request
Kronos SPb
“Industrialnaya” Kronos — acrylic enamel for steel and reinforced concrete bridges
Acrylic enamel for steel and reinforced concrete bridge structures, protects against corrosion and carbonation, service life at least 10 years.
Price on request