LITSIL® S55 — high-gloss protective polish for concrete
Water-reducible topcoat that is polished with a burnisher to a high gloss and protection against water penetration.

This solvent cleaner removes organic contaminants from concrete surfaces: membrane-forming curing compounds, sealers, adhesives, oils and bitumen. It contains no methylene chloride. The product is applied to the surface and then removed; it is used in the preparation of concrete floors in workshops and warehouses. Its freezing point is −20 °C, and the shelf life is 2 years in the original packaging.
| Manufacturer | LITSIL — OOO “Litium”, Noginsk |
|---|---|
| Type | floor material |
| Use | production workshops, warehouses and logistics |
| Base | industrial solvent cleaner; VOC 100 % |
| Colour | colourless liquid |
| Packaging | 20 l canisters |
| Application method | applied to the surface and then removed |
| Key properties | density 1.00 g/cm3; pH 7.5; freezing point −20 °C |
| Consumption | 0.25–0.40 l/m2 |
| Shelf life | 2 years from the date of manufacture at +4…+35 °C in the original packaging |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Water-reducible topcoat that is polished with a burnisher to a high gloss and protection against water penetration.
Water-based impregnation for low-grade concrete, cement-sand screeds and terrazzo floors; the surface becomes 1.5–2 times stronger.
Chemical etching compound that removes laitance and efflorescence and opens the pores of concrete before impregnations and coatings.
A set of 7 basic ready-to-use dyes for colouring ground concrete in retail and decorative interiors.
System for deep chemical colouring of concrete, toppings and polished concrete: 8 colour shades; the stains react with the concrete.
Water-based binder mixed with Portland cement and rubbed into ground concrete to fill cavities, pores and potholes.