LITSIL® S22 — moisture evaporation retarder for fresh concrete
Concentrate that forms a monomolecular film on freshly placed concrete and extends the open time for finishing.

Curing of fresh concrete without sheeting or watering is provided by this water-based membrane-forming compound complying with ASTM C 309. It is sprayed onto freshly placed surfaces in workshops, warehouses and outdoor areas. Foot traffic on the concrete is possible no earlier than 12 h after the last application. Work is carried out at temperatures from +5 °C if no rain, dew or condensation is expected within the next 4 h.
| Manufacturer | LITSIL — OOO “Litium”, Noginsk |
|---|---|
| Type | floor material |
| Use | production workshops, warehouses and logistics, outdoor areas |
| Base | water-based membrane-forming curing compound; VOC <0.10 % |
| Colour | milky-white liquid |
| Packaging | 20 l canisters, 200 l drums, 1000 l IBC containers |
| Application method | spraying onto fresh concrete |
| Application temperature | not below +5 °C (air and surface); do not apply if rain, dew or condensation is expected within 4 h |
| Curing | foot traffic no earlier than 12 h after the last application |
| Key properties | density 1.01 g/cm3; pH 7.5 |
| Consumption | 0.10–0.20 l/m2 |
| Shelf life | 2 years from the date of manufacture, indoors at +4…+35 °C in the original packaging; do not freeze; use opened containers within 1 month |
| Standards | ASTM C 309 "Liquid Membrane-Forming Compounds" |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Concentrate that forms a monomolecular film on freshly placed concrete and extends the open time for finishing.
Dye concentrates for tinting polished concrete indoors, diluted with water or acetone.
Water-based binder mixed with Portland cement and rubbed into ground concrete to fill cavities, pores and potholes.
Polysilicate impregnation for dustproofing, hardening and polishing mature concrete in warehouses, workshops and retail halls.
Chemical etching compound that removes laitance and efflorescence and opens the pores of concrete before impregnations and coatings.
Water-reducible topcoat that is polished with a burnisher to a high gloss and protection against water penetration.