Monopol
Monopol TOP 600 — quartz-corundum dry-shake topping with minimum abrasion
Topping with quartz and synthetic corundum aggregate for intensive loads; abrasion 0.07 g/cm², the lowest in the TOP series.
Price on request
Monopol
Monopol Epoxy 3 AS — conductive epoxy floor paint
A thin-layer way to obtain an antistatic floor is Epoxy 3 AS paint with conductive additives. The resistance between the surface and the earthing system is 10⁴–10⁶ Ω, and the product meets the requirements of SP 29.13330.2011. The paint is gloss, grey and non-sparking; the second coat is applied after 5–6 hours, and the room should be put into use after 48 hours. It is used in rooms with CNC equipment and computers, pharmaceuticals, laboratories, woodworking and cleanrooms.
Specifications
| Manufacturer | Monopol — OOO “TEKHBETON” |
|---|---|
| Type | epoxy floors |
| Use | antistatic/conductive, food and pharmaceutical, production workshops |
| Base | epoxy resin and polyamine hardener, conductive additives |
| Colour | grey |
| Packaging | 25 kg: component A 20.5 kg + component B 4.5 kg |
| Application method | conductive gloss paint; second coat after 5-6 hours |
| Application temperature | substrate and air during application and curing not below +10 °C; substrate moisture no more than 4% by weight; substrate no lower than M200, adhesion at least 2.0 MPa |
| Curing | the room should be put into use after 48 hours; full loads after 72 hours |
| Key properties | Resistance between the surface and the earthing system 1*10^4 - 1*10^6 Ω; compressive strength at 7 days 70 MPa; flexural strength 15 MPa; Taber 40 mg; density 1.33 g/cm³; non-volatiles 88.6%; non-sparking; gloss; pot life at 23 °C at least 30 min |
| Layer thickness | coating thickness 100-300 µm |
| Consumption | 1.61 g/m²·µm for a single-coat concrete coating |
| Shelf life | 12 months (sealed container, enclosed room) |
| Standards | complies with SP 29.13330.2011 as amended by Amendments 1, 2 (cl. 5.11-5.14); surface resistance per GOST IEC 61340-4-1-2017 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by Monopol
Monopol
Monopol Hard 40S (non-sparking) — self-levelling floor for explosion-hazard premises
Non-sparking polymer-cement self-levelling floor for explosion and fire hazard workshops, warehouses and car parks with medium and high loads; from 40 MPa.
Price on request
Monopol
Monopol TOP MAX — quartz-corundum dry-shake topping for intensive loads
Coarse quartz-corundum mix for concrete floors with very high loads in workshops, warehouses and car parks; from 80 MPa.
Price on request
Monopol
Monopol Epoxy 4M — epoxy primer with extended pot life
Epoxy primer with increased penetration for self-levelling floors, injection and consolidation of substrates; pot life from 40 minutes.
Price on request
Monopol
Monopol TOP 500 — modified quartz dry-shake topping for high loads
Topping based on modified quartz for floors with a high regime of abrasion and impact loads; compressive strength from 100 MPa, coloured version available.
Price on request
Monopol
Monopol Policrete 610 — high-build polyurethane-cement floor
High-build polyurethane-cement floor for food and chemical production, cold stores and freezer rooms; compressive strength from 57 MPa.
Price on request