Monopol BR 800 Liquid — high-strength pourable repair mortar
Non-shrink pourable R4 repair mortar for industrial concrete and topping floors; 40 MPa after one day and 80 MPa at 28 days.

Epoxy 3 enamel dustproofs and protects concrete with a thin gloss layer, and is also suitable for terrazzo, polymer, polymer-cement and metal surfaces — both horizontal and vertical. It is applied in two or more coats, the second after 5–6 hours; use begins no earlier than 48 hours later, full loads after 72 hours. The coating is non-sparking and highly chemically resistant, Taber abrasion 40 mg. Colours — grey, light grey and to the RAL catalogue.
| Manufacturer | Monopol — OOO “TEKHBETON” |
|---|---|
| Type | epoxy floors |
| Use | production workshops, warehouses and logistics, car parks and ramps, retail and public, chemically resistant |
| Base | epoxy resin, polyamine hardener, blend of organic solvents, pigments, fillers |
| Colour | grey, light grey, manufacture to the RAL catalogue possible |
| Packaging | 30 kg (A 25.7 kg + B 4.3 kg); 12 kg (A 10.3 kg + B 1.7 kg) |
| Application method | thin-layer paint in 2 or more coats on concrete, terrazzo, polymer, polymer-cement and metal substrates, horizontal and vertical; second coat after 5-6 hours |
| Application temperature | substrate and air during application and curing not below +10 °C; substrate moisture no more than 4% by weight |
| Curing | start of use no earlier than 48 hours; full loads after 72 hours; drying to degree 3 at 23 °C no more than 6 h |
| Key properties | Compressive strength at 7 days 70 MPa; flexural strength at 7 days 15 MPa; Taber 40 mg; density 1.5 g/cm³; non-volatiles at least 90%; non-sparking; gloss; pot life at 23 °C at least 30 min; high chemical resistance |
| Consumption | 1.74 g/m² per 1 µm; mineral substrate: first coat — based on a trial application, second coat no more than 175 g/m² (100 µm) |
| Shelf life | 12 months from the date of manufacture |
| Standards | certificate ROSS.RU.AZh49.N04910 (MONOPOL polymer floor coatings) |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Non-shrink pourable R4 repair mortar for industrial concrete and topping floors; 40 MPa after one day and 80 MPa at 28 days.
Epoxy primer with increased penetration for self-levelling floors, injection and consolidation of substrates; pot life from 40 minutes.
Clear solvent-free epoxy varnish for protecting and restoring concrete, terrazzo and topping floors; full load after 72 hours.
Thixotropic R3 repair mortar for concrete structures and car park entrance surfaces; compressive strength from 25 MPa after one day.
Polymer-cement screed for levelling and local repair of concrete floors in workshops and public buildings; compressive strength from 35 MPa.
Clear solvent-free epoxy primer for self-levelling polymer floors; with quartz sand it is used to repair cracks and spalls in concrete.