OGRAX-L fire protection tape
Flexible tape of oxidised graphite and rubber, including a self-adhesive version, for gaps in doors, hatches, dampers and flanges; up to 150 minutes.

The OGRAX-VENT system is designed for air ducts of general exchange, smoke control and emergency ventilation, air conditioning and local exhaust systems, as well as for flue gas ducts and chimneys. It consists of OGRAX-BM foil-faced basalt material and OGRAX-K fire-resistant adhesive: the adhesive is applied by trowel, brush or spray, and the mat is laid foil side out with an overlap and, if necessary, secured with clamps and aluminium tape. Fire resistance is EI 60 or EI 90. The service life equals that of the air duct; we supply both components.
| Manufacturer | OGRAX — GK Unihimtek, Moscow Region |
|---|---|
| Fire protection performance | EI 60, EI 90 |
| Application | air ducts |
| Service conditions | air ducts of general exchange, smoke control and emergency ventilation, air conditioning, local exhaust systems; flue gas ducts, chimneys |
| Base | OGRAX-BM foil-faced basalt material + OGRAX-K fire-resistant adhesive compound |
| Colour | adhesive — light brown |
| Packaging | OGRAX-BM — rolls 1 m wide, no more than 30 m long |
| Application method | adhesive by trowel, brush or spray; mat foil side out with a 50 mm overlap; if necessary — wire clamps, aluminium tape |
| Application temperature | not below +5 °C, RH ≤ 85% |
| Shelf life | 1 year |
| Standards | TU 5769-071-13267785-11; TU 5700-069-13267785-11 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Flexible tape of oxidised graphite and rubber, including a self-adhesive version, for gaps in doors, hatches, dampers and flanges; up to 150 minutes.
Two-component epoxy coating for fire protection of steel in open industrial atmospheres (C5), suitable for hydrocarbon fire conditions.
Water-based intumescent coating for cables with PE, PVC and rubber sheaths in enclosed premises; complies with GOST R 53311-2009.
Split steel collars with an intumescent insert for plastic sewer and water supply pipes; EI 180, diameters 16–110.
Water-based intumescent paint for steel (R15–R90) and timber (fire protection performance group 1) in indoor spaces.
Intumescent tape on silica fabric for fire protection of plastic pipes inside walls and floors; EI 180.