Supply across Uzbekistan and to Kyrgyzstan, Tajikistan and Turkmenistan +998 93 815 00 53 Telegram sale@coatix.uz
QTP® 1000 — deep-penetrating epoxy primer
QTP

QTP® 1000 — deep-penetrating epoxy primer

Floor primers

This low-viscosity epoxy polymer with rapid strength gain deeply impregnates concrete and cement-sand screeds. It serves as a primer in epoxy and polyurethane systems, as a tight-scrape priming filler when mixed with quartz sand, as a binder for repair compounds and for anchor grouting. Adhesion to concrete is more than 2.5 MPa to GOST 28574-2014. Foot traffic on the primed surface is possible after 6 h at +20 °C.

Specifications

ManufacturerQTP — OOO “KTP”, Noginsk
Typefloor primers
Useproduction workshops, warehouses and logistics, retail and public buildings
Basetwo-component low-viscosity epoxy polymer, solvent-free, rapid strength gain
Colouryellowish clear liquid
Packaging12.2 kg (10 + 2.2 kg) and 24.4 kg (20 + 4.4 kg) kits, metal pails
Application methodimpregnation of concrete and cement-sand screeds; primer in epoxy and polyurethane systems; tight-scrape priming filler with quartz sand; binder for repair compounds, anchor grouting
Application temperaturesubstrate +10…+30 °C; air +15…+30 °C
Curingat +10/+20/+30 °C: foot traffic after 12 / 6 / 4 h; light load after 3 / 2 / 1 days; full load after 6 / 5 / 4 days
Key propertiescompressive strength 79 MPa; flexural strength 72 MPa; tensile strength 50 MPa; impact strength 40 kJ/m2; Shore D hardness 85; adhesion to concrete >2.5 MPa (GOST 28574-2014); heat resistance: continuous +50 °C, up to 7 days +60 °C, up to 3 h +80 °C; pot life 20 min
Layer thickness~0.5 mm (priming filler)
Consumptionpriming 0.25–0.35 kg/m2 per coat; filler ~0.5 mm: QTP 1000 0.39 + quartz sand 0.1–0.4 mm 0.39 kg/m2
Shelf life12 months from the date of manufacture in unopened containers, in a dry, cool room at +15…+25 °C, protected from sub-zero temperatures and direct sunlight
Standardsthe grade is not listed in the SGRs reviewed on qtp.ru (epoxy compounds 2024, polyurethane compounds 2015, epoxy enamels 2018); the manufacturer is the same — OOO "KTP", Noginsk; test methods DIN / EN ISO / Taber

Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.

Other materials by QTP