QTP
QTP® 5061 — one-component silky matt varnish for polymer floors
Colourless moisture-curing solvent-free varnish for a wear-resistant finish coat on polymer coatings.
Price on request
QTP
QTP® 1051 — epoxy paint for protecting concrete floors
This epoxy paint is used for a thin-film protective coating on concrete in workshops and warehouses over QTP 1000 or QTP 1010 primers; it is also suitable as a finish coat. The coating’s hardness is 88, compressive strength 68 MPa and Taber abrasion less than 60 mg. Continuous heat resistance is up to +50 °C; foot traffic is possible after 12 h at +20 °C.
Specifications
| Manufacturer | QTP — OOO “KTP”, Noginsk |
|---|---|
| Type | epoxy floors |
| Use | production workshops, warehouses and logistics |
| Base | two-component epoxy paint for concrete, solvent-free |
| Colour | colour from the QTP chart, tinting to RAL K |
| Packaging | 22.0 kg kit: component A 20 kg (20 l pail) + component B 2.0 kg (6 l pail) |
| Application method | thin-film protective coating on concrete (QTP 1000/1010 primer) or finish coat |
| Application temperature | substrate +10…+30 °C; air +15…+30 °C |
| Curing | at +10/+20/+30 °C: foot traffic after 24 / 12 / 10 h; light load after 6 / 3 / 2 days; full load after 10 / 7 / 5 days |
| Key properties | compressive strength 68 MPa; flexural strength 50 MPa; tensile strength 27 MPa; impact strength 40 kJ/m2; hardness 88; Taber abrasion <60 mg; heat resistance: continuous +50 °C, up to 7 days +80 °C, up to 12 h +100 °C |
| Consumption | on concrete: QTP 1000/1010 primer 0.25–0.35/0.3–0.5 + 1st coat 0.25–0.35 + 2nd coat 0.15–0.25 kg/m2; on anti-slip coatings: 0.75 + 0.35 kg/m2 |
| Shelf life | 6 months from the date of manufacture in unopened containers, in a dry, cool room at +15…+25 °C, protected from sub-zero temperatures and direct sunlight |
| Standards | SGR KG.11.01.09.008.E.002319.06.18 dated 19.06.2018 (epoxy enamels, TU 2312-003-28912903-2014; grade listed); test methods DIN / EN ISO / Taber |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by QTP
QTP
QTP® 1240 AS — conductive epoxy self-levelling floor
Epoxy self-levelling compound for static-conductive and antistatic floors with electrical resistance below 10⁶ Ω.
Price on request
QTP
QTP® 1700 — fast-hardening epoxy resin for priming and repairs
Epoxy binder with rapid strength gain for priming and repair compounds; work is possible from 0 °C.
Price on request
QTP
QTP® 2645 — heat- and chemical-resistant polyurethane-cement
Three-component polyurethane-cement for levelling, self-levelling and paint coatings with continuous heat resistance up to +130 °C.
Price on request
QTP
QTP® 1740 — fast-hardening epoxy self-levelling floor for repairs
Fast-curing epoxy self-levelling compound for urgent floor repairs: at +20 °C, it can take foot traffic after just 3 h.
Price on request
QTP
QTP® 2051 — two-component polyurethane paint for concrete floors
Solvent-free polyurethane paint for thin-film protection of concrete over QTP 1000 primer or as a finish coat of polymer coatings.
Price on request