QTP
QTP® 1201 — clear epoxy primer and binder
Clear solvent-free epoxy compound for priming, repair mortars, bonding and highly filled coatings.
Price on request
QTP
QTP® 1340 — chemical-resistant epoxy self-levelling finish
This chemical-resistant epoxy-based self-levelling finish is applied with a notched trowel or squeegee. Besides concrete, it is suitable for cement plaster, epoxy fillers and asphalt in enclosed premises. Shore D hardness is 90, Taber abrasion 42 mg and flexural strength 76 MPa. Foot traffic on the coating is possible after 16 h at +20 °C.
Specifications
| Manufacturer | QTP — OOO “KTP”, Noginsk |
|---|---|
| Type | epoxy floors |
| Use | chemically resistant, production workshops |
| Base | two-component pigmented chemical-resistant epoxy compound, solvent-free |
| Colour | tinted to the QTP chart or RAL K |
| Packaging | 20.8 kg kit: component A 16 kg (20 l pail) + component B 4.8 kg (5 l pail) |
| Application method | chemical-resistant smooth self-levelling finish coating (notched trowel/squeegee); protective layer indoors over concrete, cement plaster, epoxy fillers, asphalt |
| Application temperature | substrate +10…+30 °C; air +15…+30 °C |
| Curing | at +10/+20/+30 °C: foot traffic after 32 / 16 / 10 h; light load after 6 / 3 / 2 days; full load after 10 / 7 / 5 days |
| Key properties | compressive strength 62 MPa; flexural strength 76 MPa; tensile strength 21 MPa; impact strength 44 kJ/m2; Shore D hardness 90; Taber abrasion (CS-10/1000/1000) 42 mg; heat resistance: continuous +50 °C, up to 7 days +70 °C, up to 12 h +80 °C; pot life 30 min |
| Layer thickness | 1.5–2.0 mm |
| Consumption | QTP 1000/1010 primer 0.25–0.35/0.3–0.5 kg/m2 + QTP 1340 finish layer 2.10–2.80 kg/m2 |
| Shelf life | 12 months from the date of manufacture in unopened containers, in a dry, cool room at +15…+25 °C, protected from sub-zero temperatures and direct sunlight |
| Standards | SGR RU.18.UTs.02.015.E.000127.06.24 dated 03.06.2024 (epoxy compounds for industrial floors, TU 20.30.22-019-28912903-2023; grade listed in the annex); test methods DIN / EN ISO / Taber |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by QTP
QTP
QTP® 1361 — clear chemical-resistant epoxy varnish
Clear solvent-free epoxy varnish for a chemical- and wear-resistant finish over epoxy coatings.
Price on request
QTP
QTP® 4630 — rigid-elastic coating for ramps and entrances
Epoxy-polyurethane coating for areas of heavy vehicle traffic, ramps and entrances, performing from −60 to +60 °C.
Price on request
QTP
QTP® 0310 — surface modifier for polymer floors over tiles
One-component adhesion promoter for applying polymer floors over glazed tiles, porcelain stoneware, glass and granite.
Price on request
QTP
QTP® 0110 — alkaline cleaning agent for polymer floors
Product for manual and machine cleaning of epoxy and polyurethane floors to remove grease, oil and tyre marks.
Price on request
QTP
QTP® 2051 — two-component polyurethane paint for concrete floors
Solvent-free polyurethane paint for thin-film protection of concrete over QTP 1000 primer or as a finish coat of polymer coatings.
Price on request