Supply across Uzbekistan and to Kyrgyzstan, Tajikistan and Turkmenistan +998 93 815 00 53 Telegram sale@coatix.uz
QTP® 4571 — highly elastic membrane under polymer floors
QTP

QTP® 4571 — highly elastic membrane under polymer floors

Other floor materials

This highly elastic cold-curing polymer-hybrid composition with an elongation at break of 700 % works as a membrane under rigid coatings in freezer rooms and entry zones. It is also used as a chemical-resistant sealant, an adhesive, a waterproofing membrane and protection for metal and concrete against aggressive effluents. Tear resistance is 43 N/mm and heat resistance up to +140 °C. To control application, the manufacturer recommends contrasting colours.

Specifications

ManufacturerQTP — OOO “KTP”, Noginsk
Typefloor material
Usechemically resistant, production workshops, car parks and ramps
Basetwo-component highly elastic cold-curing polymer-hybrid composition, free of organic solvents (A:B = 100:9)
Colourcontrasting colours are recommended for thickness control
Packaging21.8 kg (20.0 + 1.8 kg) and 5.45 kg (5.0 + 0.45 kg) kits
Application methodelastic membrane under rigid coatings in freezer rooms and entry zones; chemical-resistant sealant; protective coating for metal and concrete against aggressive effluents; adhesive; waterproofing membrane
Application temperature+10…+30 °C; relative humidity not more than 80 %
Curingat +10/+20/+30 °C: foot traffic after 32 / 16 / 12 h; light load after 6 / 3 / 2 days; full load after 10 / 7 / 5 days
Key propertieselongation at break 700 %; tear resistance 43 N/mm; tensile strength 11 MPa; Shore D hardness 30; Taber abrasion 57 mg; crack bridging at a 1.5 mm layer — 4.0 mm; heat resistance +140 °C
Shelf life6 months from the date of manufacture in unopened containers, in a dry, cool room at +15…+25 °C, protected from sub-zero temperatures and direct sunlight
Standardsthe grade is not listed in the SGRs reviewed on qtp.ru (epoxy compounds 2024, polyurethane compounds 2015, epoxy enamels 2018); the manufacturer is the same — OOO "KTP", Noginsk; test methods DIN / EN ISO / Taber

Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.

Other materials by QTP