VMP
IZOLEP-235 — epoxy primer-enamel for ships, ballast tanks and hydraulic structures
High-build epoxy primer-enamel for ballast tanks, decks, hydraulic structures and pressure vessels; applied down to −10 °C.
Price on request
VMP
VINIKOR-218 — alkyd primer-enamel with flame retardants for ship spaces
An alkyd primer-enamel with flame retardants for places where fire safety requirements apply: escape routes, accommodation and service spaces of ships, instruments and machinery. The coating has low flame spread and does not emit excessive smoke or toxic products when burning, as confirmed by a type approval certificate of the Russian Maritime Register of Shipping. It is applied over metal and wood on its own or as a finish coat over VINIKOR primer-enamel and epoxy, polyurethane, alkyd and other based primers; the colour is to the RAL catalogue, matt or semi-gloss.
Specifications
| Manufacturer | VMP — AO “NPKh VMP”, Yekaterinburg |
|---|---|
| Type | primer-enamels |
| Use | steel structures, marine and port structures, equipment |
| Base | alkyd, one-pack; contains flame retardants |
| Colour | to the RAL catalogue; matt (M) or semi-gloss (SG) |
| Packaging | metal pails and metal cans |
| Application method | airless spray (nozzle 0.011–0.019″, 12–19 MPa), air spray, brush, roller; 2–3 coats; thinner SOLVIN-15 up to 5 % by weight (for air spray — up to 12 %) |
| Application temperature | from +5 to +35 °C, relative humidity max. 85 %; surface at least 3 °C above the dew point; temperature of the prepared primer-enamel not below +15 °C |
| Drying | to degree 3 at 20 °C — no more than 3 h (RAL 9005 — no more than 7 h); drying schedules are given for temperatures from +5 to +35 °C; before service — at least 7 days at 20 °C |
| Key properties | volume solids — 48±4 % (M), non-volatile matter by weight — 68–76 % (M), 53–67 % (SG), conventional viscosity (VZ-246, 4 mm nozzle) — 120–150 s (M), 120–200 s (SG), low flame spread, no excessive smoke or toxic products when burning (RS) |
| Compatible materials | stand-alone coating; finish coat over VINIKOR primer-enamel and epoxy ester, epoxy urethane, polyurethane, epoxy, vinyl-epoxy, phenol-alkyd, acrylic, chlorinated rubber and alkyd based materials |
| Shelf life | 18 months from the date of manufacture |
| Standards | TU 20.30.12-022-67503963-2020; state registration certificate RU.77.01.34.008.E.003253.12.21; RS type approval certificate No. 25.44.01.12118.120 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by VMP
VMP
EVOPIPE-650 — heat-resistant coating for pipelines and equipment up to +650 °C
Multipolymer coating for above-ground pipelines and equipment, with and without thermal insulation, with a service temperature from −196 to +650 °C.
Price on request
VMP
FERROTAN-pro — penetrating polyurethane primer for rust and concrete
Penetrating primer for surfaces with minimal preparation: it consolidates firmly adhering rust and the surface layer of concrete.
Price on request
VMP
TSINOL-SV — zinc-rich compound for structures subject to resistance welding
Cold galvanising compound for welded rolling-stock structures: allows resistance welding through a single coat without impairing the weld.
Price on request
VMP
POLITON-ZP — polyurethane direct-to-metal primer-enamel (DTM)
Two-component primer-enamel with zinc phosphate: one coating instead of a primer and an enamel for C2–C5 atmospheres per ISO 12944, any RAL colour.
Price on request
VMP
VINIKOR-ecoprime-01 — high-build epoxy primer with corrosion inhibitor
Epoxy primer for steel, aluminium, fibreglass and concrete in chemical plants and shipbuilding; applied down to −10 °C.
Price on request