INDASTRO
Profskrin RC470 — R4 repair mortar for structures of class B50 and above
Thixotropic R4 mortar for repairing high-strength concrete and reinforced concrete of B50 and above; 70 MPa at 28 days, water impermeability W20.
Price on request
INDASTRO
LEVELINE FE851 AS antistatic epoxy primer — conductive layer
FE851 AS is the conductive layer of an antistatic system: the black epoxy primer with a conductive additive is applied over a levelled, primed epoxy surface before the finishing coat. The electrical resistance of the layer is 10³–10⁵ Ω, adhesion to concrete is at least 2.5 MPa, and the fire hazard class is KM2. It is used at electronics, aviation, chemical and oil-refining facilities, in medicine, cleanrooms, data centres and laboratories.
Specifications
| Manufacturer | INDASTRO — OOO “Sedrus” |
|---|---|
| Type | floor primers |
| Use | antistatic/conductive |
| Base | epoxy resin with conductive additive + phenalkamine hardener; 100% solids |
| Colour | black |
| Packaging | 24 kg kit: component A — 16 kg metal pail; component B — 8 kg plastic canister |
| Application method | conductive layer of antistatic polymer floors, over a levelled primed epoxy surface; A:B = 2:1 |
| Application temperature | air and substrate +5…+30 °C; material +15…+25 °C |
| Curing | foot traffic after 3 days; full mechanical load after 7 days; drying at +20 °C — 24 hours; next coat after 24–72 h |
| Key properties | Electrical resistance 10^3-10^5 Ω; adhesion to concrete at least 2.5 MPa; fire hazard class KM2; pot life at +20 °C — 30 min |
| Consumption | 80-100 g/m2 (approximate) |
| Shelf life | 12 months; storage +5…+30 °C |
| Standards | manufacturer's TU; KM2; SP 29.13330.2011 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by INDASTRO
INDASTRO
Profskrin RC45 FLq — winter flowable R4 mortar with polymer fibre
Flowable R4 repair mortar with polymer fibre for work at −10…+10 °C on bridges, treatment plants and underground structures; 45 MPa at 28 days.
Price on request
INDASTRO
Khimskrin LE 2k — chemical-resistant epoxy primer for concrete in aggressive environments
Two-component chemically resistant epoxy primer on concrete under lining and Khimskrin SE 2k coating; pot life at 20 °C at least 60 minutes.
Price on request
INDASTRO
Profskrin RC462 I — expanding cementitious compound for injection and anchoring
Finely dispersed expanding cementitious compound for injection grouts, filling voids and cracks, anchors and equipment installation; 60 MPa.
Price on request
INDASTRO
Profskrin RC40 Sm — fibre-reinforced finishing mortar, 40 MPa at 28 days
Finishing repair mortar with fibre and sand up to 0.63 mm for load-bearing, bridge and treatment structures; compressive strength from 20 MPa after one day.
Price on request
INDASTRO
Profskrin RC45-1.25 — thixotropic R4 mortar with fine 1.25 mm aggregate
Thixotropic R4 mortar with 1.25 mm aggregate for structural repair of concrete; 20 MPa in 24 hours and 45 MPa in 28 days.
Price on request