LEVL (INGRI)
LEVL CemPol 100 SL — non-sparking pourable concrete coating
Pourable non-sparking floor on Portland cement with marble aggregate for explosion-hazard production and storage premises; strength 45 MPa.
Price on request
LEVL (INGRI)
LEVL PoliCem PU 017 — thin-layer polyurethane-cement coating
If floor loads are moderate but resistance to chemicals and hot water is needed, thin-layer LEVL PoliCem PU 017 is suitable. The compound is spread with a gauge rake and rolled with a spiked roller over LEVL Coat 101 or PoliCem PU 15 primer. Compressive strength is at least 55 MPa, flexural 14 MPa, bond 2.0 MPa, operating range from −40 to +90 °C; a fire safety certificate is available. The palette is wide: from silver grey and beige to blue and red-brown.
Specifications
| Manufacturer | LEVL (INGRI) — OOO “Ingri”, Saint Petersburg |
|---|---|
| Type | polyurethane-cement (PU-cement) floors |
| Use | food and pharmaceutical, chemically resistant, production workshops, warehouses and logistics |
| Base | three-component: modified polyurethane, cement, aggregate |
| Colour | silver grey, beige, green, grey, blue, dark grey, red-brown |
| Packaging | 25.20 kg kit: A — 4.0 kg; B — 5.2 kg (metal pail or PE jerrycan); C — paper bag 16.00 kg; A:B:C — 1.00:1.3:4.0 |
| Application method | thin-layer PU-cement coating over LEVL Coat 101 / PoliCem PU 15 / PU 17 primer applied as a scrape coat; gauge rake + spiked roller |
| Application temperature | air and substrate +10…+30 °C (recommended +17…+23 °C); substrate moisture 5.0 % (Coat 101) / 9.0 % (PU15) |
| Curing | pot life at +20 °C at least 17 minutes; finishing layer after 12–48 h; foot traffic: +10 °C ~3 days, +20 °C ~2 days, +30 °C ~1 day; light loads ~6 / ~3 / ~2 days; full strength gain ~10 / ~7 / ~5 days |
| Key properties | Compressive strength at 28 days at least 55 MPa; flexural at least 14 MPa; bond at least 2.0 MPa; Taber abrasion no more than 1000 mg; service temperature from −40 °C to +90 °C, hot water |
| Layer thickness | 1.5–6 mm |
| Consumption | 2.7 kg/m² for 1.5 mm (system example) |
| Shelf life | 6 months; storage at +5…+30 °C |
| Standards | TU 20.30.22-087-94613022-2021; fire safety certificate No. RU C-RU.PB68.V.00645/21 (D1; T1; V1; RP1) |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by LEVL (INGRI)
LEVL (INGRI)
LEVL Concrete Strong 7 — lithium impregnation for hardening concrete
Lithium silicate impregnation for dustproofing and hardening concrete floors and polished concrete; no organic solvents.
Price on request
LEVL (INGRI)
LEVL Base 100 — dispersion for a bonding layer over old concrete
Aqueous styrene-butadiene dispersion for a contact layer between old concrete and cement mortar and for gauging LEVL CemPol 10.
Price on request
LEVL (INGRI)
LEVL Coat 104 RAPID — fast epoxy primer for polymer floors
Epoxy primer with accelerated curing under LEVL floors: foot traffic after 6 hours, full strength in about 12 hours at +20 °C.
Price on request
LEVL (INGRI)
LEVL PoliCem PU 016 — thixotropic PU-cement for skirtings and coves
Compound for vertical surfaces, skirtings and coves in PoliCem polyurethane-cement systems; service up to +90 °C, resistant to hot water.
Price on request
LEVL (INGRI)
LEVL RemTixo Rapid — rapid-hardening thixotropic repair compound
Non-shrink mix for fast concrete repair of roads, airfields and car parks; compressive strength 10 MPa after just 6 hours.
Price on request