LEVL (INGRI)
LEVL Coat 202 W — water-based vapour-permeable epoxy floor paint
Matt water-based epoxy coating for wet rooms, food and pharmaceutical production and fresh concrete; adhesion over 4 MPa.
Price on request
LEVL (INGRI)
LEVL Self 15 — cementitious levelling compound for industrial floors
The base for a self-levelling polymer or cementitious floor is levelled with LEVL Self 15, a mix on special cements. The compound is laid over LEVL Base 200 primer by hand or by machine, spread with a squeegee and rolled with a spiked roller; after 2–4 hours at +20 °C it can be walked on. After 28 days compressive strength is at least 30 MPa, flexural 8 MPa, bond 1.5 MPa. The next coating is applied after 2–3 days.
Specifications
| Manufacturer | LEVL (INGRI) — OOO “Ingri”, Saint Petersburg |
|---|---|
| Type | flooring material |
| Use | production workshops, warehouses and logistics |
| Base | special cements, modifying additives (self-levelling mix) |
| Colour | natural |
| Packaging | 25 kg bag with inner polyethylene liner; 5 kg of water per bag |
| Application method | base levelling of concrete under polymer and cementitious coatings; over LEVL Base 200 primer; squeegee + spiked roller; manual and machine application; subsequent coatings after 2–3 days |
| Application temperature | air and substrate +10…+25 °C; humidity at least 50% |
| Curing | pot life at +20 °C 20 minutes; at +20 °C: foot traffic ~2–4 hours, light loads ~1–2 days, full strength gain ~14–28 days |
| Key properties | Compressive strength after 28 days at least 30 MPa; flexural at least 8 MPa; bond at least 1.5 MPa; mechanical loads: moderate; service temperature from −40 °C to +60 °C; grain size 0.8 mm |
| Layer thickness | 5–40 mm (thinner layers are possible) |
| Consumption | 1.7 kg/m²/mm (theoretical); 8.5–68.0 kg/m² for 5–40 mm |
| Shelf life | 6 months |
| Standards | TU 5745-011-94613022-10 with Amendment No. 1; GOST 310.4, GOST R 58277-2018; SGR No. RU.77.01.34.008.E000244.02.19; declaration ROSS RU.PA01.B.28049 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by LEVL (INGRI)
LEVL (INGRI)
LEVL RemTixo Rapid — rapid-hardening thixotropic repair compound
Non-shrink mix for fast concrete repair of roads, airfields and car parks; compressive strength 10 MPa after just 6 hours.
Price on request
LEVL (INGRI)
LEVL PoliCem PU 013 ER — antistatic polyurethane-cement floor
Conductive PU-cement coating with 10⁴–10⁶ ohm resistance for chemical plants, hangars, electronics and battery rooms.
Price on request
LEVL (INGRI)
LEVL Concrete Strong 12 — lithium silicate impregnation for concrete floors
Hardening and dustproofing lithium silicate impregnation with 11 % non-volatile content for concrete, topping and polished floors.
Price on request
LEVL (INGRI)
LEVL Coat 208 — epoxy paint for concrete floors, walls and ceilings
Two-component semi-gloss RAL paint coating for workshops, car parks, food production and schools; Taber abrasion up to 65 mg.
Price on request
LEVL (INGRI)
LEVL CemPol 50 “terrazzo” — cement mix for polished terrazzo floors
Base for a decorative ground terrazzo floor in retail and public buildings; the colour is set by the aggregate, strength 45 MPa at 28 days.
Price on request