Supply across Uzbekistan and to Kyrgyzstan, Tajikistan and Turkmenistan +998 93 815 00 53 Telegram sale@coatix.uz
LEVL Coat 202 W — water-based vapour-permeable epoxy floor paint
LEVL (INGRI)

LEVL Coat 202 W — water-based vapour-permeable epoxy floor paint

Epoxy floors

LEVL Coat 202 W two-component water-based epoxy paint is vapour-permeable and suitable for fresh concrete and for rooms with high humidity and sanitary and hygiene requirements. Priming is done with the same material diluted with water, then at least two coats are applied crosswise with a velour roller. The coating is matt, with Taber abrasion up to 90 mg and adhesion to concrete over 4 MPa; it should be cleaned with alkaline products only. It is used in workshops, warehouses, the food and pharmaceutical industries, schools, kindergartens and healthcare facilities.

Specifications

ManufacturerLEVL (INGRI) — OOO “Ingri”, Saint Petersburg
Typeepoxy floors
Useproduction workshops, retail and public buildings, warehouses and logistics, food and pharmaceutical, wet rooms
Basetwo-component water-based epoxy paint; no organic solvents or plasticisers
ColourRAL colours; matt surface (gloss no more than 10 %)
Packaging14 kg (A+B kit in two containers); A : B = 7.3 : 1 (by weight)
Application methodthin-layer vapour-permeable coatings indoors with increased abrasion-resistance requirements under high humidity, on fresh concrete and where sanitary and hygiene requirements apply; priming with the same material diluted with water up to 7 %; velour roller, at least 2 coats crosswise; tools are cleaned with water
Application temperatureair and substrate +15…+25 °C; air humidity no more than 80 %; substrate visually dry; air circulation is mandatory; concrete at least 25 MPa in compression and 1.5 MPa in tension
Curingwalkable: +10 °C 24 h, +20 °C 12 h, +30 °C 8 h; light loads 5 / 3 / 2 days; full loads 8 / 6 / 4 days; drying to degree 3 no more than 3 h at +20 °C; coats over the primer after 8–24 h
Key propertiesTaber abrasion (CS10/1000 g/1000 rev.; 8 days, 23 °C) no more than 90 mg (DIN 53 109); adhesion to concrete > 4 MPa (failure in the concrete); gloss (FB-2) no more than 10 % (ISO 2813); non-volatile content 74 ± 2 %; mix density 1.6 g/cm³; high vapour permeability; pot life +10 °C 50 min, +20 °C 30 min, +30 °C 15 min
Consumption150–200 g/m² per coat (at least 2 coats); priming (diluted with water) approx. 150–200 g/m², 2 coats recommended
Shelf life6 months from the date of manufacture; storage at +5…+25 °C in a dry room
StandardsTU 2316-003-94613022-06; works per SP 29.13330.2011, SNiP 3.04.01-87; test methods GOST 28513-90, GOST 25271-93, GOST 28574-90, GOST R 52487-2005, GOST 19007-78, DIN 53 109, ISO 2813

Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.

Other materials by LEVL (INGRI)