LEVL Top Quartz — quartz hardening topping for concrete floors
Dry mix with quartz filler for hardening fresh concrete floors in workshops, warehouses and car parks; compressive strength at least 70 MPa.
The water-based version of the curing compound, LEVL Cure 101 W, is made on a styrene-acrylic copolymer and contains no organic solvent. The white emulsion forms a protective film on fresh concrete and topping for the hardening period; it dries to degree 3 in no more than 2 hours. It can be applied at air and substrate temperatures from +5 to +30 °C and humidity up to 80 %. Packaging: 9 and 18 kg jerrycans and a 180 kg drum; store at +5…+25 °C for up to 12 months.
| Manufacturer | LEVL (INGRI) — OOO “Ingri”, Saint Petersburg |
|---|---|
| Type | concrete impregnations and hardeners |
| Use | production workshops, warehouses and logistics, outdoor areas |
| Base | aqueous solution of a styrene-acrylic copolymer |
| Colour | white emulsion; the coating is not decorative |
| Packaging | plastic jerrycans of 9 and 18 kg, plastic drum of 180 kg |
| Application method | film-forming curing of freshly placed concrete and toppings (water-based version) |
| Application temperature | air and substrate +5…+30 °C; material +5…+25 °C; humidity up to 80 % |
| Curing | drying time to degree 3 no more than 2 h |
| Key properties | Density 1.00–1.05 g/cm³; non-volatile content 13 ± 1 %; drying to degree 3 no more than 2 h |
| Consumption | 100–150 g/m² |
| Shelf life | 12 months; storage at +5…+25 °C |
| Standards | TU 2313-009-94613022-2006; GOST 28513, GOST 52487, GOST 19007 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Dry mix with quartz filler for hardening fresh concrete floors in workshops, warehouses and car parks; compressive strength at least 70 MPa.
Topping with quartz and corundum aggregate for workshops, warehouses and car parks under very significant loads; abrasion (wear) no more than 0.15 g/cm².
Polymer joint panel with elastic polyurethane infill for constructing and repairing thermal and shrinkage joints in warehouses and workshops.
Matt water-based epoxy coating for wet rooms, food and pharmaceutical production and fresh concrete; adhesion over 4 MPa.
Lightweight epoxy compound with high quartz sand loading for warehouses, workshops, car parks and wet rooms; compressive strength 60 MPa.
Epoxy primer with mineral filler under all LEVL epoxy and polyurethane floors; gives a textured surface without a sand broadcast.