Instead of metal profiles, thermal, shrinkage and transition joints in floors can be formed with the LEVL JOINT PANEL 130 composite panel. It is bonded into the floor slab, and the joint inside is filled with elastic polyurethane, so warehouse vehicles pass over it silently. Compressive strength after 7 days is at least 60 MPa, flexural 35 MPa, Shore D hardness from 80, elongation at break of the sealant at least 600 %. Cross-shaped and T-shaped elements are produced for intersections; installation is carried out by a specialist contractor.
| Manufacturer | LEVL (INGRI) — OOO “Ingri”, Saint Petersburg |
|---|---|
| Type | flooring material |
| Use | production workshops, warehouses and logistics, retail and public buildings, food and pharmaceutical |
| Base | composite polymer base, elastic polyurethane joint infill |
| Colour | grey |
| Packaging | panel 1200 × 130 × 20 mm; elements 130 X (cross-shaped intersection) and 130 T (T-shaped) |
| Application method | construction and repair of thermal, shrinkage and transition joints in floors; bonded into the floor slab; installation by a specialist contractor |
| Application temperature | +5…+25 °C (surface and air) |
| Key properties | Compressive strength (7 days) at least 60 MPa; flexural at least 35 MPa; Shore D hardness at least 80; elongation at break of the sealant at least 600 %; abrasion (wear) no more than 0.38 g/cm²; mechanical loads: very significant |
| Layer thickness | 20 mm (panel thickness) |
| Shelf life | 24 months; storage at +5…+35 °C, horizontally, away from UV |
| Standards | TU 22.23.19-127-94613022-2023; GOST R 58277-2018, GOST 24621-2015, GOST R 59523-2021, GOST 13087-2018 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Topping with quartz and corundum aggregate for workshops, warehouses and car parks under very significant loads; abrasion (wear) no more than 0.15 g/cm².
Film-forming curing compound for concrete and toppings based on an aqueous styrene-acrylic copolymer, without organic solvent.
Two-component semi-gloss RAL paint coating for workshops, car parks, food production and schools; Taber abrasion up to 65 mg.
Grey antistatic paint coating for warehouses, production facilities and laboratories, and for repairing antistatic floors; 10⁶–10⁹ ohm.
Pourable non-sparking floor on Portland cement with marble aggregate for explosion-hazard production and storage premises; strength 45 MPa.
Highly elastic thermoplastic polyolefin tape on epoxy adhesive for expansion joints, cold joints and moving cracks; elongation 600%.
