Supply across Uzbekistan and to Kyrgyzstan, Tajikistan and Turkmenistan +998 93 815 00 53 Telegram sale@coatix.uz
ZIVKON TE — TPO tape for expansion joints and cracks
LEVL (INGRI)

ZIVKON TE — TPO tape for expansion joints and cracks

Joint sealants

ZIVKON TE thermoplastic polyolefin tape is designed for structural, expansion and cold joints and moving cracks in new and existing buildings. In the ZIVKON TE Elastic system it is bonded with ZIVKON FX 6001 epoxy adhesive to concrete, steel, plastic, glass or wood, and tape sections are joined by heat welding. The tape is used in foundations, pools, reinforced concrete tanks, tunnels, hydroelectric power plants and water treatment systems. Elongation at break is 600%, bond to concrete via the adhesive at least 2 MPa; the tape is UV-resistant, and the system on epoxy adhesive works from −50 to +90 °C.

Specifications

ManufacturerLEVL (INGRI) — OOO “Ingri”
Typejoint sealants
Usejoints and abutments, foundations and basements, tanks and pools, tunnels and metro, hydraulic structures and dams
Basehighly elastic waterproofing tape made of thermoplastic polyolefin (TPO); in the ZIVKON TE Elastic system it is bonded with ZIVKON FX 6001 two-component epoxy adhesive (modified, solvent-free, filled epoxy resin); tape sections are joined by heat welding
Packagingrolls of 20 m: ZIVKON TE 100/1 (100×1 mm), 150/1, 150/2, 200/1, 200/2, 250/1, 250/2, 300/1, 300/2 (width×thickness, mm)
Application methodwaterproofing of structural, expansion and cold joints and moving cracks in new and existing buildings; joints with large openings, complex configuration, on uneven surfaces; in comprehensive waterproofing of buried structures (metro systems, tunnels, pools, aeration tanks) with Wetisol Spray materials, from outside or inside; concrete, stone, mortar — at least 21 days old, shot blasting, vacuuming; steel — sandblasting; polyester and epoxy substrates, ceramics, glass — light grinding; not on surfaces treated with silicones; thermal insulation — WETISOL Spray Foam; UV protection and decoration — Wetisol Spray-400 UV or LEVL Coat 221 AR; by experienced professionals only
Application temperatureair and substrate +5…+35 °C (do not apply if temperatures below +5 °C are expected within the next 24 h); relative air humidity max 85% (if higher — dehumidifiers, hot-air blowers, heat guns); substrate 3 °C above the dew point
Curingpot life of ZIVKON FX 6001 adhesive: 60 min at +10 °C, 40 min at +20 °C, 20 min at +30 °C; the system can be put into service after 10 days at +10 °C, 7 days at +20 °C, 5 days at +30 °C
Key propertiestape density 0.95 g/cm³ (GOST 15139); ultimate tensile strength at least: longitudinal 10.6 MPa (1 mm) and 14.0 MPa (2 mm), transverse 7.1 MPa (1 mm) and 14.0 MPa (2 mm) (GOST 14236); relative elongation at break 600% (GOST 14236); Shore D hardness at least 80 (GOST 24621); bond strength to the substrate via ZIVKON FX 6001 adhesive at least: dry and matt-damp concrete 2 MPa (failure in the concrete), sandblasted steel 5 MPa (GOST 28574); pull-off strength of the tape from the adhesive at least 6 MPa (2 mm) and 4 MPa (1 mm) (GOST 28574); UV resistance — resistant; resistance to direct water pressure, weathering, biocorrosion; service temperature of the system with epoxy adhesive from −50 to +90 °C
Layer thicknesstape 1 mm or 2 mm; width 100, 150, 200, 250, 300 mm
ConsumptionZIVKON FX 6001 adhesive per 1 linear m of tape: 10 cm / 1 mm — 0.7 kg; 15 cm / 1 mm — 1.0 kg; 20 cm / 1 mm — 1.2 kg; 15 cm / 2 mm — 1.1 kg; 20 cm / 2 mm — 1.4 kg; 25 cm / 2 mm — 1.7 kg; 30 cm / 2 mm — 2.0 kg
Shelf lifetape — 36 months from the date of manufacture in the original sealed undamaged packaging in a dry cool place; ZIVKON FX 6001 adhesive — 12 months in a dry place at +5…+25 °C
StandardsTU 22.21.42-080-94613022-2020; TTI No. 2008.03-ZIV

Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.

Other materials by LEVL (INGRI)