LEVL (INGRI)
LEVL Coat 253 — matt polyurethane varnish for polymer floors
Colourless UV-resistant varnish protecting polymer floors, including those with coloured flakes; gloss no more than 10 GU, hides minor defects.
Price on request
LEVL (INGRI)
LEVL Top WL — mortar topping for restoring old concrete floors
When there is no fresh concrete and a worn floor needs restoring, LEVL Top WL is used: a mortar mix laid wet-on-wet over a bonding layer on the old substrate. The mortar is spread with a squeegee or straightedge, floated with a power trowel and protected with LEVL Cure 100; it can be delivered by a mortar/concrete pump. Compressive strength is at least 70 MPa, flexural strength at least 8 MPa, abrasion up to 0.4 g/cm², service temperature from −40 to +70 °C. It suits workshops, warehouses, car parks and outdoor areas.
Specifications
| Manufacturer | LEVL (INGRI) — OOO “Ingri”, Saint Petersburg |
|---|---|
| Type | dry-shake toppings |
| Use | production workshops, warehouses and logistics, car parks and ramps, outdoor areas |
| Base | dry cement mix (mortar type, applied wet-on-wet over a bonding layer) |
| Colour | light grey, red, green, dark grey |
| Application method | thin high-strength coating over old concrete: bonding layer of LEVL Prime EP + Silverbond 30 + quartz sand, then LEVL Top WL mortar by squeegee/straightedge, floating with a power trowel; LEVL Cure 100; can be delivered by a mortar/concrete pump; indoors and outdoors |
| Application temperature | +5…+30 °C (ambient and substrate); substrate: concrete at least B22.5, pull-off strength at least 1.5 MPa |
| Key properties | Compressive strength after 28 days at least 70 MPa; flexural strength at least 8 MPa; abrasion (wear) no more than 0.4 g/cm²; bond to substrate (with LEVL Prime EP) at least 1.5 MPa; mechanical loads: significant; service temperature from −40 °C to +70 °C |
| Layer thickness | 5–15 mm (system example: 10.0 mm) |
| Consumption | 2.1 kg/m² per 1 mm of thickness (theoretical); at 10 mm: 21.0 kg/m² + water 2.52 kg/m² |
| Shelf life | 12 months from the date of manufacture |
| Standards | TU 23.64.10-063-94613022-2018; GOST 310.4, GOST 13087, GOST 31356; SP 29.13330.2011 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by LEVL (INGRI)
LEVL (INGRI)
LEVL Coat 315 TIXO — textured non-slip epoxy coating
Relief thin-layer RAL epoxy coating for warehouses, workshops, car parks and wet rooms where a non-slip floor is needed.
Price on request
LEVL (INGRI)
LEVL Concrete Strong 7 — lithium impregnation for hardening concrete
Lithium silicate impregnation for dustproofing and hardening concrete floors and polished concrete; no organic solvents.
Price on request
LEVL (INGRI)
LEVL Base 200 — acrylic primer under levelling compounds and cementitious floors
Aqueous acrylic dispersion for priming concrete before LEVL Self and CemPol: reduces substrate water absorption and improves adhesion.
Price on request
LEVL (INGRI)
LEVL Coat 309 — chemically resistant epoxy self-levelling floor
Self-levelling epoxy coating for warehouses, workshops and laboratories exposed to chemicals; fire hazard class KM2.
Price on request
LEVL (INGRI)
LEVL Coat 221 AR — acrylic paint for outdoor concrete
Self-priming acrylic RAL coating for concrete and metal exposed to precipitation and UV; applied at temperatures from −20 °C.
Price on request