Supply across Uzbekistan and to Kyrgyzstan, Tajikistan and Turkmenistan +998 93 815 00 53 Telegram sale@coatix.uz
LEVL Coat 309 — chemically resistant epoxy self-levelling floor
LEVL (INGRI)

LEVL Coat 309 — chemically resistant epoxy self-levelling floor

Epoxy floors

Warehouses, production and assembly premises where the floor is exposed to chemicals are coated with LEVL Coat 309. The epoxy compound with increased chemical resistance is poured over LEVL Coat 101, 103 or 106M primers and rolled with a spiked roller. Shore D hardness is at least 74, Taber abrasion up to 60 mg, adhesion 2.5 MPa; the coating resists yellowing and bridges cracks. A fire safety certificate with class KM2 is available; the list of resistance to specific substances is provided on request.

Specifications

ManufacturerLEVL (INGRI) — OOO “Ingri”, Saint Petersburg
Typeepoxy floors
Usechemically resistant, warehouses and logistics, production workshops, food and pharmaceutical, retail and public buildings
Basechemically resistant epoxy compound
PackagingA : B = 3.11 : 1 (by weight)
Application methodprotective self-levelling coatings on concrete substrates of warehouse, production and assembly premises exposed to chemicals; over LEVL Coat 101, 103 or 106M primer; squeegee, rolling with a spiked roller
Application temperatureair and substrate +10…+30 °C; components +15…+25 °C (recommended +18…+25 °C); air humidity no more than 80 %; substrate moisture after priming no more than 1.5 % by weight; with primer 101/103 no more than 5.0 % by weight, with 106M no more than 10.0 % by weight; 3 °C above the dew point
Curinglight loads: +10 °C 32 h, +20 °C 16 h, +30 °C 12 h; foot traffic: 6 / 3 / 2 days; full loads: 10 / 7 / 5 days; next coat after 12–48 h at +20 °C
Key propertiesHigh chemical resistance (list on request); Shore D hardness (7 days) at least 74; Taber abrasion resistance (CS10/1000 g/1000 rev.) no more than 60 mg; adhesion (over LC 101 primer) at least 2.5 MPa (failure in the concrete); elongation at break at least 5 %; tensile strength at break at least 10 MPa; density 1.60 ± 0.05 g/cm³; non-volatile content at least 96 %; resistance to yellowing; crack bridging; pot life +10 °C 60 min, +20 °C 30 min, +30 °C 15 min; fire hazard class KM2
Layer thicknessadmissible 1.5–5.0 mm; recommended 2.0 mm
Consumption1.60 kg/m² per 1 mm of thickness; example: wearing/coloured layer 1.5 mm — LEVL Coat 309 2.4 kg/m² (LEVL Coat 101 primer 0.35 kg/m² + sand 0.5 kg/m²)
StandardsTU 2257-006-94613022-06 with Amendment No. 1; fire safety KM2 (V2, T1, D2, RP1), certificate No. C-RU.PB58.V.02638; substrate per SP 71.13330.2017; test methods GOST 31992.1, GOST R 31939, GOST 28574, GOST 24621, GOST 11262

Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.

Other materials by LEVL (INGRI)