Before pouring LEVL Self levelling compounds and CemPol 20, 40 and 15 SL self-levelling floors, the substrate is treated with LEVL Base 200 primer. The aqueous acrylic dispersion reduces the water absorption of concrete and improves its bond to the next layer. The primer is applied with a soft brush or roller in two coats, the first diluted with water; the film forms in no more than 2 hours. Supplied in 10 kg jerrycans; store at temperatures above 0 °C.
| Manufacturer | LEVL (INGRI) — OOO “Ingri”, Saint Petersburg |
|---|---|
| Type | floor primers |
| Use | production workshops, warehouses and logistics |
| Base | aqueous acrylic dispersion |
| Colour | yellow |
| Packaging | jerrycans of 10 kg |
| Application method | primer under cementitious and polymer-cement coatings (LEVL Self, CemPol 20/40/15 SL): reduces water absorption and improves adhesion; soft brush or roller, 2 coats (the first diluted with water) |
| Application temperature | air and substrate from +5 °C |
| Curing | drying to film formation ≤2 h |
| Key properties | Dry residue 6.0–14.5 %; drying to film ≤2 h |
| Consumption | 0.15 kg/m² per coat (+ water 0.15 kg/m² in the first coat); under CemPol 15 SL: 0.4 kg/m² |
| Shelf life | 12 months; store above 0 °C, do not freeze |
| Standards | TU 2241-023-94613022-06 with Amendment No. 1; GOST 19007, GOST 31939 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Topping with quartz and corundum aggregate for workshops, warehouses and car parks under very significant loads; abrasion (wear) no more than 0.15 g/cm².
Solvent-free primer for concrete aged from 7 days and damp substrates, a temporary moisture barrier under polymer coatings.
Highly elastic thermoplastic polyolefin tape on epoxy adhesive for expansion joints, cold joints and moving cracks; elongation 600%.
Polyethylene fibres that make carboacrylates, adhesives, sealants and coatings thixotropic; chemically resistant, asbestos-free additive.
Relief thin-layer RAL epoxy coating for warehouses, workshops, car parks and wet rooms where a non-slip floor is needed.
Thin-layer PU-cement coating and sand seal coat in PoliCem systems for food and chemical workshops; Taber abrasion up to 60 mg.
