LEVL (INGRI)
LEVL Coat 101 — universal epoxy primer for polymer floors
Epoxy primer under self-levelling epoxy and polyurethane floors; also a filler, cove compound and injection resin; adhesion from 2.5 MPa.
Price on request
LEVL (INGRI)
LEVL PoliCem PU 015 — polyurethane-cement paint coating
LEVL PoliCem PU 015 performs two tasks in PoliCem systems: it serves as a stand-alone paint coating, smooth or textured, and seals the sand broadcast in thick-layer floors. It is applied over PoliCem PU 05 primer with a trowel, followed by rolling with a velour roller. Taber abrasion is no more than 60 mg, adhesion no more than grade 1, service from −40 to +90 °C. The palette has eight colours, including yellow, blue and green.
Specifications
| Manufacturer | LEVL (INGRI) — OOO “Ingri”, Saint Petersburg |
|---|---|
| Type | polyurethane-cement (PU-cement) floors |
| Use | food and pharmaceutical, chemically resistant, production workshops |
| Base | three-component: modified polyurethane, cement, aggregate (thin-layer paint coat) |
| Colour | silver grey, light grey, dark grey, beige, red-brown, green, yellow, blue |
| Packaging | 10 kg kit: A — metal pail 3.9 kg; B — plastic jerrycan 3.7 kg; C — paper bag 2.4 kg; A : B : C = 1.00 : 0.95 : 0.62 |
| Application method | smooth or textured paint coat over PoliCem PU 05 primer (2–3 coats with a trowel + velour roller) |
| Application temperature | air and substrate +10…+30 °C (recommended +17…+23 °C); air humidity 40–80 %; substrate moisture no more than 6 % |
| Curing | pot life at +20 °C 15 min; light loads / recoat interval, foot traffic, full strength gain: +10 °C ~24 h / ~48 h / ~14 days; +20 °C ~16 h / ~36 h / ~10 days; +30 °C ~12 h / ~24 h / ~7 days |
| Key properties | Taber abrasion (CS10/1000 g/1000 rev.) no more than 60 mg; adhesion no more than grade 1; density 1.23 ± 0.05 g/cm³; service temperature from −40 °C to +90 °C (short-term up to +120 °C in systems from 9 mm) |
| Layer thickness | from 0.2 to 0.5 mm |
| Consumption | smooth 0.5 mm: 0.5 kg/m²; textured (sealing the broadcast): 0.4 kg/m²; seal coat in PU 013/014 systems: 1.0 kg/m² |
| Shelf life | 6 months; storage at +5…+25 °C |
| Standards | TU 20.30.22-087-94613022-2021 (test method in the table: per TU 2257-021-94613022-2010); GOST 31992.1, GOST 15140 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by LEVL (INGRI)
LEVL (INGRI)
LEVL Coat 306 DA — decontaminable epoxy self-levelling floor
Smooth seamless epoxy coating for nuclear industry rooms subject to decontamination; Shore D hardness at least 70.
Price on request
LEVL (INGRI)
LEVL Base 200 — acrylic primer under levelling compounds and cementitious floors
Aqueous acrylic dispersion for priming concrete before LEVL Self and CemPol: reduces substrate water absorption and improves adhesion.
Price on request
LEVL (INGRI)
LEVL Coat 315 TIXO — textured non-slip epoxy coating
Relief thin-layer RAL epoxy coating for warehouses, workshops, car parks and wet rooms where a non-slip floor is needed.
Price on request
LEVL (INGRI)
LEVL Coat 104 RAPID — fast epoxy primer for polymer floors
Epoxy primer with accelerated curing under LEVL floors: foot traffic after 6 hours, full strength in about 12 hours at +20 °C.
Price on request
LEVL (INGRI)
LEVL CemPol 100 SL — non-sparking pourable concrete coating
Pourable non-sparking floor on Portland cement with marble aggregate for explosion-hazard production and storage premises; strength 45 MPa.
Price on request