Supply across Uzbekistan and to Kyrgyzstan, Tajikistan and Turkmenistan +998 93 815 00 53 Telegram sale@coatix.uz
LEVL Coat 315 TIXO — textured non-slip epoxy coating
LEVL (INGRI)

LEVL Coat 315 TIXO — textured non-slip epoxy coating

Epoxy floors

A relief non-slip surface is produced by LEVL Coat 315 TIXO three-component epoxy compound. It is spread with a fine-notched trowel and the texture is then formed with a wool roller; the pattern can still be corrected for 15 minutes. The coating is designed for moderate wear loads: Shore D hardness at least 70, Taber abrasion up to 80 mg, service from −10 to +60 °C. It suits warehouses, workshops, covered car parks, rooms with a “wet cycle”, schools, kindergartens and healthcare facilities.

Specifications

ManufacturerLEVL (INGRI) — OOO “Ingri”, Saint Petersburg
Typeepoxy floors
Usewarehouses and logistics, production workshops, car parks and ramps, wet rooms, retail and public buildings, food and pharmaceutical
Baseepoxy resin, three-component (A+B+C, C is the filler)
ColourRAL colours; textured relief finish
Packagingkit (A+B+C) 11 kg: A — 10 l metal pail 8.23 kg; B — 3 l pail 1.77 kg; C — 1 kg bag; A : B : C = 4.65 : 1 : 0.57 (by weight)
Application methodtextured (relief, non-slip) thin-layer coating for concrete and cementitious substrates with moderate wear loads: fine-notched trowel (A2) as a scrape coat, then a wool roller with a pile of at least 10 mm; the texture can be adjusted for 15 min; over LEVL Coat 101/103 or 106M primer; a UV-resistant finish is possible
Application temperatureair and substrate +15…+30 °C; components at least +15 °C (recommended +18…+25 °C); air humidity no more than 80 %; substrate moisture no more than 5.0 % by weight (primer 101/103) or 10.0 % by weight (106M); 3 °C above the dew point
Curinglight loads: +10 °C 32 h, +20 °C 16 h, +30 °C 12 h; foot traffic: 6 / 3 / 2 days; full loads: 10 / 7 / 5 days; next coat after 12–48 h at 20 °C
Key propertiesShore D hardness (7 days) at least 70; Taber abrasion resistance (CS10/1000 g/1000 rev.) no more than 80 mg; adhesion (over LC 101 primer) at least 2.5 MPa (failure in the concrete); density of the A+B+C mix 1.3 ± 0.05 g/cm³; non-volatile content at least 95 %; resistance to process water, temperature changes and bacteriological attack; pot life +10 °C 60 min, +20 °C 30 min, +30 °C 15 min; service temperature from −10 to +60 °C; chemical resistance: on request
Layer thicknessadmissible application thickness 0.5 mm (in the systems table: “textured coating 0.65 mm thick”)
Consumption(A+B+C): 0.65 kg/m² per 0.5 mm of coating thickness; do not exceed 0.65 kg/m²
Shelf life6 months from the date of manufacture; storage at +5…+25 °C
StandardsTU 20.16.40-066-94613022-2019; substrate per SP 71.13330.2017 (cl. 8.12.2, Table 8.11); test methods GOST 31992.1, GOST R 31939, GOST 28574, GOST 24621

Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.

Other materials by LEVL (INGRI)