LEVL (INGRI)
LEVL CemPol 20 — rapid-hardening self-levelling cementitious floor
Self-levelling finishing floor on special cements for workshops, warehouses and car parks; foot traffic after 2–4 hours, strength 50 MPa at 28 days.
Price on request
LEVL (INGRI)
LEVL RemTixo Rapid AF — thixotropic repair compound for work in frost
LEVL RemTixo Rapid AF, a thixotropic (non-sagging) mix, is designed for repairing concrete and reinforced concrete in the cold, including in operating cold stores, on roads and airfields. Work is possible at air temperatures from −10 to +20 °C: in frost the mix is prepared with hot water and placed on a pre-heated substrate. After 2 hours compressive strength is 25 MPa, after one day 40 MPa, at 28 days at least 60 MPa. Bond to substrate 2.5 MPa, water impermeability W16, frost resistance F2200.
Specifications
| Manufacturer | LEVL (INGRI) — OOO “Ingri”, Saint Petersburg |
|---|---|
| Type | concrete floor repair |
| Use | production workshops, warehouses and logistics, car parks and ramps, outdoor areas |
| Base | special cements, modifying additives, polymer fibre (thixotropic, non-shrink, rapid-hardening) |
| Colour | natural |
| Packaging | 25 kg bag with inner polyethylene liner; 3.6–3.7 kg of water per bag |
| Application method | thixotropic repair of concrete and reinforced concrete, including in operating cold stores; roads and airfields; at sub-zero temperatures: mixed with hot water over a pre-heated substrate |
| Application temperature | air from −10 °C to +20 °C; substrate 0…+20 °C; material from +5 °C |
| Curing | pot life at +20 °C 15 minutes; compressive strength 25 MPa after 2 hours, 40 MPa after 24 hours |
| Key properties | Compressive strength at least 25 / 40 / 60 MPa (2 h / 24 h / 28 days); flexural 3 / 5 / 8 MPa; bond at least 2.5 MPa; W16; F2200; Fkz100; service temperature from −40 °C to +60 °C |
| Layer thickness | 10–100 mm |
| Consumption | 2.0 kg/m²/mm; 20–200 kg/m² for 10–100 mm |
| Shelf life | 6 months |
| Standards | TU 5745-025-94613022-10 with Amendment No. 1; GOST 310.4, GOST R 58277, GOST 12730.5, GOST 10060; not subject to fire certification |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by LEVL (INGRI)
LEVL (INGRI)
LEVL Base 100 — dispersion for a bonding layer over old concrete
Aqueous styrene-butadiene dispersion for a contact layer between old concrete and cement mortar and for gauging LEVL CemPol 10.
Price on request
LEVL (INGRI)
LEVL Coat 218 — high-gloss epoxy primer-enamel for floors
Thin-layer RAL paint coating for food, pharmaceutical and storage premises and car parks; service from −25 to +60 °C.
Price on request
LEVL (INGRI)
LEVL Coat 351 AS — antistatic polyurethane self-levelling floor
Smooth antistatic PU coating with chemical resistance and combustibility group G1 for chemicals, hangars, electronics and laboratories; 10⁶–10⁹ ohm.
Price on request
LEVL (INGRI)
LEVL PoliCem PU 018 — textured anti-slip PU-cement floor
Textured polyurethane-cement coating without sand broadcast for wet food and chemical workshops; compressive strength 45 MPa.
Price on request
LEVL (INGRI)
LEVL Coat 501 — clear epoxy binder for decorative floors
Binder for floors and screeds with coloured quartz sand: clear, gloss, chemically resistant; fire hazard class KM2.
Price on request