LEVL (INGRI)
LEVL RemTixo Rapid — rapid-hardening thixotropic repair compound
Non-shrink mix for fast concrete repair of roads, airfields and car parks; compressive strength 10 MPa after just 6 hours.
Price on request
LEVL (INGRI)
LEVL PoliCem PU 018 — textured anti-slip PU-cement floor
The anti-slip texture of LEVL PoliCem PU 018 is formed without a sand broadcast: after spreading with a gauge rake or screed box, the surface is rolled with a spiked roller and then a textured foam roller. The highly filled three-component compound is laid over PoliCem PU 05 primer. Compressive strength is at least 45 MPa, flexural 13 MPa; in the thick-layer version the coating withstands freezers down to −45 °C and steam cleaning up to +120 °C. It suits wet rooms in food, pharmaceutical and chemical production.
Specifications
| Manufacturer | LEVL (INGRI) — OOO “Ingri”, Saint Petersburg |
|---|---|
| Type | polyurethane-cement (PU-cement) floors |
| Use | food and pharmaceutical, chemically resistant, production workshops, wet rooms |
| Base | three-component, highly filled: modified polyurethane, cement, aggregate |
| Colour | silver grey, beige, green, dark grey, red-brown (textured matt) |
| Packaging | 31.24 kg kit: A — metal pail 3.00 kg; B — plastic jerrycan 3.24 kg; C — paper bag 25 kg; A : B : C = 1.00 : 1.08 : 8.33 |
| Application method | textured coating 6–12 mm over PoliCem PU 05 primer: gauge rake or screed box, spiked roller, then a textured foam roller |
| Application temperature | air and substrate +10…+30 °C (recommended +17…+23 °C); air humidity 40–80 %; substrate moisture no more than 6 % |
| Curing | pot life at +20 °C ~17 min; light loads / recoat interval, foot traffic, full strength gain: +10 °C ~72 h / ~6 days / ~10 days; +20 °C ~48 h / ~3 days / ~7 days; +30 °C ~24 h / ~2 days / ~5 days |
| Key properties | Compressive strength (28 days) at least 45 MPa; flexural at least 13 MPa; bond at least 2.0 MPa; Taber abrasion no more than 1000 mg; service temperature from −40 °C to +90 °C; at 9 mm and more: freezers at −45 °C, steam up to +120 °C |
| Layer thickness | from 6 to 12 mm |
| Consumption | 2.07 kg/m² per 1 mm (theoretical); 12.4–24.9 kg/m² for 6–12 mm |
| Shelf life | 6 months; storage at +5…+25 °C |
| Standards | TU 20.30.22-087-94613022-2021; GOST 5802, GOST R 58277 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by LEVL (INGRI)
LEVL (INGRI)
LEVL Top Corund — corundum topping for heavily loaded floors
Hardening dry mix with corundum for concrete floors under very significant mechanical loads; compressive strength at least 90 MPa.
Price on request
LEVL (INGRI)
LEVL Coat 309 — chemically resistant epoxy self-levelling floor
Self-levelling epoxy coating for warehouses, workshops and laboratories exposed to chemicals; fire hazard class KM2.
Price on request
LEVL (INGRI)
LEVL Concrete Strong 7 — lithium impregnation for hardening concrete
Lithium silicate impregnation for dustproofing and hardening concrete floors and polished concrete; no organic solvents.
Price on request
LEVL (INGRI)
LEVL Coat 103 — epoxy primer for mineral substrates
Epoxy primer under LEVL polymer floors, base for fillers, coves and injection compounds; adhesion to concrete at least 2.5 MPa.
Price on request
LEVL (INGRI)
LEVL Coat 161 — polyurethane hardening impregnation for concrete
One-component impregnation for weak porous mineral substrates; applied at air temperatures down to −10 °C, service from −60 °C.
Price on request