LEVL (INGRI)
ZIVKON CR 7101 — chemical-resistant epoxy coating for floors and structures
Two-component epoxy paint for floors, walls and steel structures at plants with chemical exposure; service from −40 to +80 °C.
Price on request
LEVL (INGRI)
LEVL Top Corund — corundum topping for heavily loaded floors
LEVL Top Corund, a dry mix of cement with graded corundum and quartz sand, is intended for floors under very significant mechanical loads. It is worked into fresh concrete of grade M300 or higher, after which the surface is treated with LEVL Cure 100 curing compound. After 28 days compressive strength reaches 90 MPa, abrasion (wear) does not exceed 0.35 g/cm², and service is permitted from −40 to +60 °C. Colours: natural grey, green, red, light grey and dark grey.
Specifications
| Manufacturer | LEVL (INGRI) — OOO “Ingri”, Saint Petersburg |
|---|---|
| Type | dry-shake toppings |
| Use | production workshops, warehouses and logistics, car parks and ramps, retail and public buildings |
| Base | cement, graded corundum and quartz sand fillers, functional additives |
| Colour | natural (grey); coloured: green, red, light grey, dark grey |
| Packaging | 25 kg bag with inner polyethylene liner |
| Application method | dry-shake application onto freshly placed concrete (spreader cart or by hand) as 2/3 + 1/3 of the consumption, floating and polishing with a power trowel; then LEVL Cure 100 (0.10–0.15 kg/m²); joints: Vilaterm backer rod + LEVL Flex PU40; concrete at least M300 (B22.5), without air-entraining admixtures |
| Application temperature | air and substrate +5…+30 °C; air humidity at least 50% |
| Curing | foot traffic: +10 °C ~18 hours, +20 °C ~12 hours, +25 °C ~8 hours; full strength gain: ~10 / ~7 / ~5 days |
| Key properties | Compressive strength (28 days) at least 90 MPa; abrasion (wear) no more than 0.35 g/cm²; mortar density at least 2300 kg/m³; mechanical loads: very significant; environment: non-aggressive and slightly aggressive; liquids: high; service temperature from minus 40 °C to +60 °C (short-term up to +100 °C) |
| Layer thickness | 2–5 mm |
| Consumption | 3–8 kg/m²; natural: significant loads 3...5, very significant loads 5...8 kg/m²; coloured: 5...6 / 6...8 kg/m² |
| Shelf life | 12 months; storage at +5...+30 °C |
| Standards | TU 23.64.10-062-94613022-2018; GOST 310.4, GOST 13087; SP 29.13330.2011 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by LEVL (INGRI)
LEVL (INGRI)
LEVL Self 15 — cementitious levelling compound for industrial floors
Self-levelling mix for preparing concrete for polymer and cementitious coatings in workshops and warehouses; flexural strength 8 MPa.
Price on request
LEVL (INGRI)
LEVL Coat 252T — gloss light-stable polyurethane floor varnish
Two-component clear varnish protecting polymer floors, including those with coloured chips, against abrasion and UV; gloss at least 60 %.
Price on request
LEVL (INGRI)
LEVL PoliCem PU 015 — polyurethane-cement paint coating
Thin-layer PU-cement coating and sand seal coat in PoliCem systems for food and chemical workshops; Taber abrasion up to 60 mg.
Price on request
LEVL (INGRI)
LEVL Top Cor — corundum topping for concrete floors
Dry hardening mix with corundum and quartz sand for workshops, warehouses and car parks; compressive strength at least 80 MPa.
Price on request
LEVL (INGRI)
LEVL Base 100 — dispersion for a bonding layer over old concrete
Aqueous styrene-butadiene dispersion for a contact layer between old concrete and cement mortar and for gauging LEVL CemPol 10.
Price on request