LEVL (INGRI)
LEVL Coat 070 — catalyst for LEVL methyl methacrylate floors
Powder polymerisation catalyst for LEVL Coat 171, 271 and 573 carboacrylate materials; the dosage depends on temperature.
Price on request
LEVL (INGRI)
LEVL Top Cor — corundum topping for concrete floors
LEVL Top Cor corundum topping reaches at least 80 MPa in compression after 28 days (slightly less than Top Corund), with abrasion up to 0.35 g/cm². The mix of cement with graded corundum and quartz sand is broadcast dry onto fresh concrete of at least M300, floated by machine, and then LEVL Cure 100 is applied. The coating is designed for very significant mechanical loads in workshops, warehouses, car parks and on ramps. Besides the natural grey version, green, red, light grey and dark grey ones are produced.
Specifications
| Manufacturer | LEVL (INGRI) — OOO “Ingri”, Saint Petersburg |
|---|---|
| Type | dry-shake toppings |
| Use | production workshops, warehouses and logistics, car parks and ramps, retail and public buildings |
| Base | cement, graded corundum and quartz sand fillers, functional additives |
| Colour | natural (grey); coloured: green, red, light grey, dark grey |
| Packaging | 25 kg bag with inner polyethylene liner |
| Application method | dry-shake application onto freshly placed concrete (spreader cart or by hand) as 2/3 + 1/3 of the consumption, floating and polishing with a power trowel; then LEVL Cure 100 (0.10–0.15 kg/m²); joints: Vilaterm backer rod + LEVL Flex PU40; concrete at least M300 (B22.5), without air-entraining admixtures |
| Application temperature | air and substrate +5…+30 °C; air humidity at least 50% |
| Curing | foot traffic: +10 °C ~18 hours, +20 °C ~12 hours, +25 °C ~8 hours; full strength gain: ~10 / ~7 / ~5 days |
| Key properties | Compressive strength (28 days) at least 80 MPa; abrasion (wear) no more than 0.35 g/cm²; mechanical loads: very significant; environment: non-aggressive and slightly aggressive; service temperature from minus 40 °C to +60 °C (short-term up to +100 °C) |
| Layer thickness | 2–5 mm |
| Consumption | 3–8 kg/m²; natural: significant loads 3...5, very significant loads 5...8 kg/m²; coloured: 5...6 / 6...8 kg/m² |
| Shelf life | 12 months; storage at +5...+30 °C |
| Standards | TU 23.64.10-062-94613022-2018; GOST 310.4, GOST 13087; SP 29.13330.2011 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by LEVL (INGRI)
LEVL (INGRI)
LEVL RemTixo Rapid AF — thixotropic repair compound for work in frost
Rapid-hardening fibre-reinforced mix for repairing concrete in cold stores, on roads and airfields at air temperatures down to −10 °C.
Price on request
LEVL (INGRI)
LEVL Coat 310 — epoxy self-levelling floor, class KM1
Self-levelling epoxy coating with a certified fire hazard class KM1 for warehouses, car parks, schools and healthcare facilities.
Price on request
LEVL (INGRI)
LEVL Coat 151 — polyurethane primer under polyurethane floors
One-component primer-impregnation for concrete and metal before LEVL polyurethane coatings; applied at temperatures from −10 °C.
Price on request
LEVL (INGRI)
LEVL Base 100 — dispersion for a bonding layer over old concrete
Aqueous styrene-butadiene dispersion for a contact layer between old concrete and cement mortar and for gauging LEVL CemPol 10.
Price on request
LEVL (INGRI)
LEVL Coat 171 — methyl methacrylate primer for MMA systems
Fast-curing carboacrylate resin primer under LEVL Coat 573 and 271 systems; work is possible down to −10 °C with an accelerator.
Price on request