Supply across Uzbekistan and to Kyrgyzstan, Tajikistan and Turkmenistan +998 93 815 00 53 Telegram sale@coatix.uz
LEVL Coat 252T — gloss light-stable polyurethane floor varnish
LEVL (INGRI)

LEVL Coat 252T — gloss light-stable polyurethane floor varnish

Sealers and topcoats

Clear gloss LEVL Coat 252T varnish completes decorative polymer floors: it protects the surface and coloured chips against abrasion and is UV-resistant. The two-component polyurethane is applied with a velour roller in a thin continuous coat no later than 24 hours after the main coating has been laid at +20 °C. Gloss is at least 60 %, adhesion to the underlying layer over 4 MPa; the varnish is wear-, weather- and moisture-resistant. It suits sites with high decorative requirements and intensive wear.

Specifications

ManufacturerLEVL (INGRI) — OOO “Ingri”, Saint Petersburg
Typevarnishes and finishing coats
Usedecorative
Basetwo-component polyurethane; contains organic solvents
Colourclear, gloss (gloss at least 60 %)
Packaging10 kg (A+B kit in two containers); A : B = 2.70 : 1 (by weight) for LC 252T
Application methodlight-stable varnish over newly laid polymer coatings (no later than 24 h after laying at 20 °C): protects the floor against abrasion, including coloured chips; with a velour roller in a thin, even coat without misses; next coat after 12–36 h at +20 °C
Application temperatureair and substrate +10…+30 °C; air humidity no more than 80 %; 3 °C above the dew point; protect from water and condensation until cured
Curingtack-free: +10 °C 2 h, +20 °C 0.5 h, +30 °C 0.5 h; walkable: 24 / 12 / 18 h; light loads: 5 / 3 / 2 days; full loads: 7 / 5 / 5 days; drying to degree 3 no more than 5 h at +20 °C
Key propertiesGloss (FB-2 gloss meter, ISO 2813) at least 60 %; adhesion to the underlying layer (LC 303) > 4 MPa; non-volatile content 50 ± 5 %; mix density ~0.95 g/cm³; wear resistance, weather resistance, moisture resistance, UV resistance; pot life +10 °C 50 min, +20 °C 30 min, +30 °C 15 min
Consumption50–70 g/m² per coat
Shelf life6 months from the date of manufacture; storage at +5…+25 °C in a dry room
StandardsTU 2311-005-94613022-06; works per SP 29.13330.2011, SNiP 3.04.01-87; gloss per ISO 2813

Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.

Other materials by LEVL (INGRI)