LEVL (INGRI)
LEVL Base 200 — acrylic primer under levelling compounds and cementitious floors
Aqueous acrylic dispersion for priming concrete before LEVL Self and CemPol: reduces substrate water absorption and improves adhesion.
Price on request
LEVL (INGRI)
LEVL CemPol 20 — rapid-hardening self-levelling cementitious floor
LEVL CemPol 20 self-levelling mix hardens quickly: at +20 °C the floor can be walked on after just 2–4 hours, and within the first day compressive strength reaches 25 MPa. At 28 days the value is at least 50 MPa, flexural 10 MPa, abrasion up to 0.5 g/cm². It is laid by hand or by machine over LEVL Base 200 primer and rolled with a spiked roller. The material is non-combustible (NG, KM-0) and suits workshops, warehouses, car parks, retail and public buildings.
Specifications
| Manufacturer | LEVL (INGRI) — OOO “Ingri”, Saint Petersburg |
|---|---|
| Type | flooring material |
| Use | production workshops, warehouses and logistics, car parks and ramps, retail and public buildings |
| Base | special cements, modifying additives (self-levelling rapid-hardening mix) |
| Colour | natural |
| Packaging | 25 kg bag with inner polyethylene liner; 3.75 kg of water per bag |
| Application method | self-levelling finishing floor over LEVL Base 200 primer (2 coats of 0.15 kg/m² each): squeegee + spiked roller; manual and machine application; LEVL Cure 100 |
| Application temperature | air and substrate +10…+25 °C; humidity at least 50%; 3 °C above the dew point |
| Curing | pot life at +20 °C at least 20 minutes; at +20 °C: foot traffic ~2–4 hours, light loads ~24 hours, full strength gain ~14–28 days |
| Key properties | Compressive strength at least 25 MPa (1 day) / 50 MPa (28 days); flexural 4 / 10 MPa; abrasion (wear) no more than 0.5 g/cm²; bond to substrate at least 2 MPa; impact: at least 5 kg from a height of 1 m; mechanical loads: significant; non-combustible (NG, KM-0); service temperature from −40 °C to +60 °C |
| Layer thickness | 10–30 mm |
| Consumption | theoretically 1.9 kg/m² per 1 mm of thickness; 19.0–57.0 kg/m² for 10–30 mm |
| Shelf life | 6 months |
| Standards | TU 5745-011-94613022-10 with Amendment No. 1; GOST 310.4, GOST 13087, GOST 31356, GOST 30353-95; fire safety certificate No. C-RU.PB 58.V.02644 (NG, KM-0); declaration ROSS RU D-RU.RA01.V.25307/19; SGR RU.77.01.34.008.E.000244.02.19 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by LEVL (INGRI)
LEVL (INGRI)
LEVL Coat 352 — wear-resistant polyurethane floor for car parks and warehouses
Single-layer low-density PU self-levelling coating for car parks, car washes, warehouses and sales floors; service from −40 to +80 °C.
Price on request
LEVL (INGRI)
LEVL Coat 208 — epoxy paint for concrete floors, walls and ceilings
Two-component semi-gloss RAL paint coating for workshops, car parks, food production and schools; Taber abrasion up to 65 mg.
Price on request
LEVL (INGRI)
LEVL PoliCem PU 017 — thin-layer polyurethane-cement coating
PU-cement floor for food workshops and laboratories with moderate abrasive and chemical loads; service up to +90 °C.
Price on request
LEVL (INGRI)
LEVL Coat 309 — chemically resistant epoxy self-levelling floor
Self-levelling epoxy coating for warehouses, workshops and laboratories exposed to chemicals; fire hazard class KM2.
Price on request
LEVL (INGRI)
LEVL Top WL — mortar topping for restoring old concrete floors
High-strength cement mix laid over old concrete indoors and outdoors; compressive strength at least 70 MPa, flexural strength 8 MPa.
Price on request