Supply across Uzbekistan and to Kyrgyzstan, Tajikistan and Turkmenistan +998 93 815 00 53 Telegram sale@coatix.uz
LEVL Coat 358 — highly elastic polyurethane self-levelling floor
LEVL (INGRI)

LEVL Coat 358 — highly elastic polyurethane self-levelling floor

Polyurethane floors

Elongation at break of at least 50 % allows LEVL Coat 358 polyurethane coating to bridge cracks in concrete. The two-component compound is poured in one layer over LEVL Coat 108 or 151 primer, optionally finished with LEVL Coat 254 matt varnish; with sand the coating becomes stronger. Taber abrasion is up to 60 mg, Shore D hardness from 55, service from −25 to +60 °C. It suits workshops, warehouses including cold ones, energy, transport and agricultural facilities, schools, healthcare and sports institutions.

Specifications

ManufacturerLEVL (INGRI) — OOO “Ingri”, Saint Petersburg
Typepolyurethane floors
Useproduction workshops, retail and public buildings, warehouses and logistics, chemically resistant
Basepolyesters, fillers, pigments, special additives + aromatic polyisocyanate (two-component)
ColourRAL K-7 colour chart
Packagingkit A+B = 30 kg (A: 20 l metal pail, B: 5 l jerrycan); A : B = 5.9 : 1 (by weight)
Application methodwear-resistant single-layer self-levelling coating that bridges cracks in concrete; with sand, of increased strength; over LEVL Coat 108 / 151 / Wetisol S-MP1 primer; pouring, squeegee or notched trowel, spiked roller; optionally LEVL Coat 254 matt varnish
Application temperatureair +10…+30 °C (recommended +17…+23 °C); substrate +10…+30 °C (recommended +15…+25 °C); material +15…+25 °C; air humidity up to 80 %; substrate moisture no more than 5.0 % by weight (primers 108/101/103) or 4.0 % by weight (151, Wetisol S-MP1); 3 °C above the dew point; with sand, work at +17…+23 °C
Curinglight foot traffic: +10 °C ~32 h, +20 °C ~16 h, +30 °C ~12 h; light loads ~6 / ~3 / ~2 days; full strength gain ~10 / ~7 / ~5 days; next coat after 12–48 h at +20 °C
Key propertiesTaber abrasion resistance (CS10/1000 g/1000 rev.) no more than 60 mg; Shore D hardness at least 55; relative elongation at break at least 50 %; tensile strength at break at least 7 MPa; adhesion at least 2.5 MPa (failure in the concrete); mix density 1.66 ± 0.1 kg/dm³; non-volatile content at least 98 %; pot life at least 30 min (+10 °C ~50 min, +20 °C ~30 min, +30 °C ~15 min); service temperature from −25 to +60 °C
Layer thicknessadmissible 1.5–5.0 mm; in highly filled systems 3.0–12.0 mm
Consumptiontheoretical 1.66 kg/m² at 1 mm thickness; 1.5 mm layer: 2.5 kg/m² (+ LEVL Coat 254 matt varnish 0.08 kg/m², optional); 2.5 mm system: LEVL Coat 358 3.04 kg/m² + quartz sand 0.1–0.3 mm 1.52 kg/m²
Shelf life6 months from the date of manufacture; storage at +5…+25 °C
StandardsTU 2257-007-94613022-06 with Amendment No. 1; coating requirements per SP 71.13330.2017 Table 8.12; test methods GOST 31992.1, GOST 31939, GOST 28574, GOST 24621, GOST 11262

Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.

Other materials by LEVL (INGRI)