LEVL (INGRI)
LEVL CemPol 50 “terrazzo” — cement mix for polished terrazzo floors
Base for a decorative ground terrazzo floor in retail and public buildings; the colour is set by the aggregate, strength 45 MPa at 28 days.
Price on request
LEVL (INGRI)
LEVL Coat 207 W — clear water-based epoxy primer-enamel for concrete
LEVL Coat 207 W clear gloss water-based primer-enamel can work as a stand-alone dustproofing coating for concrete with a decorative sheen. Its second purpose is as a primer on old, damp or fresh concrete (from 7 days) under epoxy and polyurethane floors: the compound serves as a temporary moisture barrier at substrate moisture up to 10 %. The material contains no organic solvents and is odourless, can be diluted with water up to 1 : 1, and tools are washed with water. Adhesion to concrete is at least 2.5 MPa, service from −50 to +50 °C.
Specifications
| Manufacturer | LEVL (INGRI) — OOO “Ingri”, Saint Petersburg |
|---|---|
| Type | floor primers |
| Use | decorative |
| Base | epoxy resin + water-emulsified amine hardener, special additives; no organic solvents |
| Colour | clear, gloss |
| Packaging | 10 kg metal pail; A : B = 2 : 1 by weight; the mix may be diluted with water up to 1 : 1 |
| Application method | clear primer-enamel: protection, hardening and dustproofing of concrete with a decorative gloss; primer on old, damp or fresh concrete (temporary moisture barrier, “young” concrete from 7 days) under epoxy and polyurethane coatings; roller, flat trowel, brush, 2 or more coats without puddles; tools are cleaned with water |
| Application temperature | air and substrate +10…+30 °C (recommended +10…+25 °C); material +15…+30 °C (recommended +17…+23 °C); air humidity no more than 80 %; substrate moisture no more than 10.0 % by weight; 3 °C above the dew point |
| Curing | next coat no earlier than 12 h and no later than 48 h at +20 ± 2 °C |
| Key properties | Adhesion to concrete at least 2.5 MPa; density (A+B) 1.08 ± 0.1 g/cm³; non-volatile content at least 55 %; odourless; pot life +10 °C ~50 min, +20 °C ~30 min, +30 °C ~15 min; service temperature from −50 °C to +50 °C |
| Consumption | 0.1–0.25 kg/m² per coat (2 coats recommended; at an application rate of 100–250 g/m²); priming of a cementitious substrate 0.30 kg/m² |
| Shelf life | 6 months from the date of manufacture; storage at +5…+25 °C |
| Standards | TU 2316-003-94613022-06 with Amendment No. 1; test methods GOST 31992.1, GOST 31939, GOST 28574 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by LEVL (INGRI)
LEVL (INGRI)
LEVL PoliCem PU 017 — thin-layer polyurethane-cement coating
PU-cement floor for food workshops and laboratories with moderate abrasive and chemical loads; service up to +90 °C.
Price on request
LEVL (INGRI)
LEVL CemPol 20 — rapid-hardening self-levelling cementitious floor
Self-levelling finishing floor on special cements for workshops, warehouses and car parks; foot traffic after 2–4 hours, strength 50 MPa at 28 days.
Price on request
LEVL (INGRI)
LEVL Coat 154 Rapid — fast-drying polyurethane primer
One-component primer-impregnation for concrete and metal under polyurethane floors; next coat at +20 °C after just 3 hours.
Price on request
LEVL (INGRI)
LEVL Coat 311 AS — antistatic epoxy self-levelling floor
Gloss antistatic RAL coating for server rooms, cleanrooms, electronics and stores of flammable substances; 10⁶–10⁹ ohm.
Price on request
LEVL (INGRI)
LEVL Base 100 — dispersion for a bonding layer over old concrete
Aqueous styrene-butadiene dispersion for a contact layer between old concrete and cement mortar and for gauging LEVL CemPol 10.
Price on request