LEVL (INGRI)
LEVL Coat 303 — epoxy self-levelling floor, smooth and textured
The range's main epoxy self-levelling floor for warehouses, workshops, car parks, healthcare and food production; compressive strength 63 MPa.
Price on request
LEVL (INGRI)
LEVL PoliCem PU 017 — thin-layer polyurethane-cement coating
If floor loads are moderate but resistance to chemicals and hot water is needed, thin-layer LEVL PoliCem PU 017 is suitable. The compound is spread with a gauge rake and rolled with a spiked roller over LEVL Coat 101 or PoliCem PU 15 primer. Compressive strength is at least 55 MPa, flexural 14 MPa, bond 2.0 MPa, operating range from −40 to +90 °C; a fire safety certificate is available. The palette is wide: from silver grey and beige to blue and red-brown.
Specifications
| Manufacturer | LEVL (INGRI) — OOO “Ingri”, Saint Petersburg |
|---|---|
| Type | polyurethane-cement (PU-cement) floors |
| Use | food and pharmaceutical, chemically resistant, production workshops, warehouses and logistics |
| Base | three-component: modified polyurethane, cement, aggregate |
| Colour | silver grey, beige, green, grey, blue, dark grey, red-brown |
| Packaging | 25.20 kg kit: A — 4.0 kg; B — 5.2 kg (metal pail or PE jerrycan); C — paper bag 16.00 kg; A:B:C — 1.00:1.3:4.0 |
| Application method | thin-layer PU-cement coating over LEVL Coat 101 / PoliCem PU 15 / PU 17 primer applied as a scrape coat; gauge rake + spiked roller |
| Application temperature | air and substrate +10…+30 °C (recommended +17…+23 °C); substrate moisture 5.0 % (Coat 101) / 9.0 % (PU15) |
| Curing | pot life at +20 °C at least 17 minutes; finishing layer after 12–48 h; foot traffic: +10 °C ~3 days, +20 °C ~2 days, +30 °C ~1 day; light loads ~6 / ~3 / ~2 days; full strength gain ~10 / ~7 / ~5 days |
| Key properties | Compressive strength at 28 days at least 55 MPa; flexural at least 14 MPa; bond at least 2.0 MPa; Taber abrasion no more than 1000 mg; service temperature from −40 °C to +90 °C, hot water |
| Layer thickness | 1.5–6 mm |
| Consumption | 2.7 kg/m² for 1.5 mm (system example) |
| Shelf life | 6 months; storage at +5…+30 °C |
| Standards | TU 20.30.22-087-94613022-2021; fire safety certificate No. RU C-RU.PB68.V.00645/21 (D1; T1; V1; RP1) |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by LEVL (INGRI)
LEVL (INGRI)
LEVL CemPol 30 — low-shrinkage cement screed and industrial floor
Mortar mix for a finishing cementitious floor or a base under self-levelling coatings; compressive strength 40 MPa, non-combustible (NG, KM-0).
Price on request
LEVL (INGRI)
LEVL Coat 101 — universal epoxy primer for polymer floors
Epoxy primer under self-levelling epoxy and polyurethane floors; also a filler, cove compound and injection resin; adhesion from 2.5 MPa.
Price on request
LEVL (INGRI)
LEVL Coat 271 — finishing layer for methyl methacrylate floors
Carboacrylate finish for MMA systems with coloured filler, indoors and outdoors; Taber abrasion no more than 45 mg.
Price on request
LEVL (INGRI)
LEVL PoliCem PU 018 — textured anti-slip PU-cement floor
Textured polyurethane-cement coating without sand broadcast for wet food and chemical workshops; compressive strength 45 MPa.
Price on request
LEVL (INGRI)
LEVL Coat 315 TIXO — textured non-slip epoxy coating
Relief thin-layer RAL epoxy coating for warehouses, workshops, car parks and wet rooms where a non-slip floor is needed.
Price on request