LEVL Coat 310 — epoxy self-levelling floor, class KM1
Self-levelling epoxy coating with a certified fire hazard class KM1 for warehouses, car parks, schools and healthcare facilities.

LEVL Top Quartz quartz topping is broadcast dry onto freshly placed concrete and floated with a power trowel, forming a wear-resistant top layer of the floor. It is designed for production workshops, warehouses, car parks, ramps, retail and public buildings with significant mechanical loads. Compressive strength after 28 days is at least 70 MPa, abrasion (wear) no more than 0.4 g/cm², service temperature from −40 to +60 °C. Besides natural grey, the topping is available in green, red, light grey and dark grey.
| Manufacturer | LEVL (INGRI) — OOO “Ingri”, Saint Petersburg |
|---|---|
| Type | dry-shake toppings |
| Use | production workshops, warehouses and logistics, car parks and ramps, retail and public buildings |
| Base | cement, graded quartz filler, functional additives |
| Colour | natural (grey); coloured: green, red, light grey, dark grey |
| Packaging | 25 kg bag with inner polyethylene liner |
| Application method | dry-shake application onto freshly placed concrete (spreader cart or by hand) as 2/3 + 1/3 of the consumption, floating and polishing with a power trowel; then LEVL Cure 100 (0.10–0.15 kg/m²); joints: Vilaterm backer rod + LEVL Flex PU40; concrete at least M300 (B22.5), without air-entraining admixtures |
| Application temperature | air and substrate +5…+30 °C; air humidity at least 50% |
| Curing | foot traffic: +10 °C ~18 hours, +20 °C ~12 hours, +25 °C ~8 hours; full strength gain: ~10 / ~7 / ~5 days |
| Key properties | Compressive strength (28 days) at least 70 MPa; abrasion (wear) no more than 0.4 g/cm²; mortar density at least 2300 kg/m³; mechanical loads: significant; environment: non-aggressive and slightly aggressive; intensity of exposure to liquids: high; service temperature from minus 40 °C to +60 °C (short-term below minus 40 °C and up to +100 °C) |
| Layer thickness | 2–5 mm |
| Consumption | 3–8 kg/m²; natural: moderate loads 3...5, significant loads 5...8 kg/m²; coloured: 5...6 / 6...8 kg/m² |
| Shelf life | 12 months (unopened packaging); storage at +5...+30 °C |
| Standards | TU 23.64.10-062-94613022-2018; GOST 310.4, GOST 13087, GOST 5802, GOST 8735; SP 29.13330.2011 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Self-levelling epoxy coating with a certified fire hazard class KM1 for warehouses, car parks, schools and healthcare facilities.
Two-component semi-gloss RAL paint coating for workshops, car parks, food production and schools; Taber abrasion up to 65 mg.
Epoxy primer under LEVL polymer floors, base for fillers, coves and injection compounds; adhesion to concrete at least 2.5 MPa.
Thixotropic epoxy paste with quartz filler for levelling and sealing substrate pores before polymer coatings; adhesion 2.5 MPa.
Aqueous styrene-butadiene dispersion for a contact layer between old concrete and cement mortar and for gauging LEVL CemPol 10.
Two-component epoxy paint for floors, walls and steel structures at plants with chemical exposure; service from −40 to +80 °C.