LEVL (INGRI)
LEVL Coat 208 — epoxy paint for concrete floors, walls and ceilings
Two-component semi-gloss RAL paint coating for workshops, car parks, food production and schools; Taber abrasion up to 65 mg.
Price on request
LEVL (INGRI)
LEVL Self 12 — self-levelling underlayment for industrial coatings
LEVL Self 12 levelling compound prepares the concrete substrate for industrial polymer and cementitious coatings; it is not a finishing floor. The mix is poured over LEVL Base 200 primer, spread with a squeegee and rolled with a spiked roller, by hand or by machine. At +20 °C it can be walked on after 2–4 hours, and the next coating is laid after 2–3 days. Compressive strength after 28 days is at least 30 MPa, flexural 7 MPa, bond to substrate 1.5 MPa.
Specifications
| Manufacturer | LEVL (INGRI) — OOO “Ingri”, Saint Petersburg |
|---|---|
| Type | flooring material |
| Use | production workshops, warehouses and logistics |
| Base | special cements, modifying additives (self-levelling mix) |
| Colour | natural |
| Packaging | 25 kg bag with inner polyethylene liner; 4.5–4.75 kg of water per bag |
| Application method | base levelling of concrete under industrial polymer and cementitious coatings; over LEVL Base 200 primer (2 × 0.15 kg/m²); squeegee + spiked roller; manual and machine application; subsequent coatings after 2–3 days |
| Application temperature | air and substrate +10…+25 °C; humidity at least 50% |
| Curing | pot life at +20 °C 20 minutes; at +20 °C: foot traffic ~2–4 hours, light loads ~1–2 days, full strength gain ~14–28 days |
| Key properties | Compressive strength after 28 days at least 30 MPa; flexural at least 7 MPa; bond at least 1.5 MPa; mechanical loads: moderate; service temperature from −40 °C to +60 °C; grain size 0.63 mm |
| Layer thickness | 5–30 mm (thinner layers are possible) |
| Consumption | 1.77 kg/m²/mm (theoretical); 8.9–53.1 kg/m² for 5–30 mm |
| Shelf life | 6 months |
| Standards | TU 5745-011-94613022-10 with Amendment No. 1; GOST 310.4, GOST R 58277-2018; SGR No. RU.77.01.34.008.E.000244.02.19; declaration ROSS RU.PA01.B.28049 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by LEVL (INGRI)
LEVL (INGRI)
LEVL Prime Concrete — bonding layer for cement mortars over old concrete
Dry cement mix for a contact layer between old concrete and new LEVL Top WL or CemPol 10 mortar; bond at least 1.5 MPa.
Price on request
LEVL (INGRI)
LEVL Cure 101 W — water-based curing compound for fresh concrete
Film-forming curing compound for concrete and toppings based on an aqueous styrene-acrylic copolymer, without organic solvent.
Price on request
LEVL (INGRI)
LEVL Coat 502 — clear epoxy layer for self-levelling 3D floors
Three-component clear compound for the finishing layer of a 3D floor over decorative PVC film; Taber abrasion up to 50 mg.
Price on request
LEVL (INGRI)
LEVL Top Quartz — quartz hardening topping for concrete floors
Dry mix with quartz filler for hardening fresh concrete floors in workshops, warehouses and car parks; compressive strength at least 70 MPa.
Price on request
LEVL (INGRI)
LEVL Coat 253 — matt polyurethane varnish for polymer floors
Colourless UV-resistant varnish protecting polymer floors, including those with coloured flakes; gloss no more than 10 GU, hides minor defects.
Price on request